12
5 Set up with the display and adjustment module
VEGADIF 85 • Profibus PA
53575-EN-230814
Application
In this menu item, you select the application. The selection comprises
level, flow, differential pressure, density and interface measurement.
Units
In this menu item you determine the adjustment and temperature unit
as well as the unit of the static pressure of the instrument. Depending
on the selected application in the menu item "
Application
", different
adjustment units are available.
Position correction
In this menu item you compensate the influence of the installation
position of the instrument (offset) on the measured value.
Min. adjustment
In this menu item you carry out the min. adjustment for level.
Enter the percentage value and the corresponding pressure value for
the min. level.
Max. adjustment
In this menu item you carry out the max. adjustment for level.
Enter the percentage value and the corresponding pressure value for
the max. level.
Min. adjustment
In this menu item you carry out the min. adjustment for flow.
Enter the percentage value and the corresponding pressure value for
the min. flow.
Max. adjustment
In this menu item you carry out the max. adjustment for flow.
Enter the percentage value and the corresponding pressure value for
the max. flow.
Linearisation
In this menu item, you select the characteristics of the output signal.
Quick setup - Level meas-
urement
Quick setup - Flow meas-
urement