30
9 Supplement
VEGACAP 65 • Two-wire
30019-EN-230510
9 Supplement
9.1 Technical data
Note for approved instruments
The technical data in the respective safety instructions which are included in delivery are valid for
approved instruments (e.g. with Ex approval). These data can differ from the data listed herein, for
example regarding the process conditions or the voltage supply.
All approval documents can be downloaded from our homepage.
General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Process fitting - thread
316L, steel C22.8 (1.0460)
Ʋ Process fitting - flange
316L
Ʋ Process seal
Klingersil C-4400
Ʋ Insulation (partly insulated)
PA, PTFE
Ʋ Probe (cable partly PTFE insulated:
ø 6 mm/0.236 in)
316L
Ʋ Probe (cable PTFE partly insulated:
ø 8 mm/0.315 in)
1)
Steel
Ʋ Probe (cable PA partly insulated:
ø 12 mm/0.472 in)
2)
Steel
Ʋ Gravity weight
316L + PEEK
Materials, non-wetted parts
Ʋ Plastic housing
Plastic PBT (Polyester)
Ʋ Aluminium die-cast housing
Aluminium die-casting AlSi10Mg, powder-coated (Basis:
Polyester)
Ʋ Stainless steel housing (precision
casting)
316L
Ʋ Stainless steel housing (electropol-
ished)
316L
Ʋ Seal between housing and housing lid Silicone
Ʋ Ground terminal
316L
Ʋ Cable gland
PA, stainless steel, brass
Ʋ Sealing, cable gland
NBR
Ʋ Blind plug, cable gland
PA
Process fittings
Ʋ Pipe thread, cylindrical (DIN 3852-A) G1, G1½
Ʋ Pipe thread, conical (ASME B1.20.1) 1 NPT, 1½ NPT
Ʋ Flanges
DIN from DN 40, ASME from 1½"
1)
Cable connected electrically conductive with the gravity weight.
2)
Cable connected electrically conductive with the gravity weight.
