Vega VEGACAL 60 Series, Operating Instructions Manual

Page: 9 / 16

9
5 Setup
Electronics module • VEGACAL series 60
30531-EN-170531
5 Setup
5.1 Setup - Electronics 4 … 20 mA, Profibus PA,
Foundation Fieldbus
If you have ordered the electronics module by stating the sensor
serial number , it is ready for operation after installation and connec-
tion to power supply.
If you ordered the electronics module without stating the sensor
serial number or you are using a suitable electronics module from
stock, you first have to load the sensor data after installation.
In general, the sensor with the new electronics module is ready for
operation. However, the sensor name is "VEGACAL 62" (presetting)
and the serial number is not entered correctly.
If these specifications should be correct, you have to enter the serial
number.
Move to "www.vega.com", "
Instrument search (serial number) ". After
entering the serial number, the order data of the sensor are displayed.
The serial number is also available directly from VEGA.
Below the order data you will find "
Sensor data for Service-DTM " as
XML file. Load this file with " Save as " on your PC and transfer it then
via PACTware and the Service DTM to the sensor.
As a rule, settings already carried out on site with the previous elec-
tronics module, such as min./max. adjustment etc., must be repeated.
Tip:
To do this, use the copy function of the display and adjustment mod-
ule or the adjustment software PACTware.
5.2 Setup - electronics with signal conditioning
instrument
Set all adjustment elements on the new electronics module to the
settings of the old module.
Since the electronics modules are slightly different (approx. 5 %), it
can be necessary to carry out an adjustment on the signal condition-
ing instrument after having exchanged the electronics.
With sensor serial num-
ber
Without sensor serial
number
Load sensor data
Adjustment
Adjustment