37
6 Set up the sensor with the display and adjustment module
VEGABAR 87 • Modbus and Levelmaster protocol
46297-EN-220624
Menu item
Default value
Backlight
Switched on
Diagnostics
Menu item
Parameter
Default value
Device status
-
Peak value
Pressure
Current pressure measured value
Pointer function temp.
Temperature
Actual measuring cell and electronic tem-
perature
Simulation
Process pressure
Additional adjustments
Menu item
Parameter
Default value
Date/Time
Actual date/Actual time
Reset
Delivery status, basic settings
Copy instrument settings
Read from sensor, write into sensor
Scaling
Scaling size
Volume in l
Scaling format
0 % corresponds to 0 l
100 % corresponds to 100 l
Special parameters
Service-Login
No reset
Info
Menu item
Parameter
Device name
VEGABAR 87
Instrument version
Hardware and software version
Factory calibration date
Date
Sensor characteristics
Order-specific characteristics
6.7 Save parameter adjustment data
We recommended writing down the adjustment data, e.g. in this op-
erating instructions manual, and archiving them afterwards. They are
thus available for multiple use or service purposes.
If the instrument is equipped with a display and adjustment module,
the parameter adjustment data can be saved therein. The procedure
is described in menu item "
Copy device settings
".
On paper
In the display and adjust-
ment module
