background image

3

1 For your safety

VEGABAR 81 • Slave sensor for electronic differential pressure

48050-EN-160212

1  For your safety

1.1  Authorised personnel

All operations described in this operating instructions manual must 

be carried out only by trained specialist personnel authorised by the 

plant operator.
During work on and with the device the required personal protective 

equipment must always be worn.

1.2  Appropriate use

VEGABAR 81 is a slave sensor for electronic differential pressure 

measurement.

You can find detailed information about the area of application in 

chapter "

Product description

".

Operational reliability is ensured only if the instrument is properly 

used according to the specifications in the operating instructions 

manual as well as possible supplementary instructions.

1.3  Warning about incorrect use

Inappropriate or incorrect use of the instrument can give rise to 

application-specific hazards, e.g. vessel overfill or damage to system 

components through incorrect mounting or adjustment. Also the pro

-

tective characteristics of the instrument can be influenced. 

1.4  General safety instructions

This is a high-tech instrument requiring the strict observance of stand-

ard regulations and guidelines. The user must take note of the safety 

instructions in this operating instructions manual, the country-specific 

installation standards as well as all prevailing safety regulations and 

accident prevention rules.
The instrument must only be operated in a technically flawless and 

reliable condition. The operator is responsible for trouble-free opera

-

tion of the instrument.

During the entire duration of use, the user is obliged to determine the 

compliance of the necessary occupational safety measures with the 

current valid rules and regulations and also take note of new regula

-

tions.

1.5  CE conformity

The device fulfills the legal requirements of the applicable EC guide

-

lines. By affixing the CE marking, we confirm successful testing of the 

product.
You can find the CE Certificate of Conformity in the download section 

of our homepage.

Summary of Contents for VEGABAR 81





















Reviews: