Vega SHLD 2, Operating Instructions Manual

Page: 70 / 88

68 63138-US-200110
Vibration - Tested to IEC 68-2-6, IEC 68-2-27, and
IEC 68-2-36
- DIN EN 60721-3-4 - Classification 4M7
Life Expectancy 20 years
Corrosion Mild
Licensing Any use of the source holder requires a specific
license in the U.S. Check local requirements for
International use.
Leak Test At least once every 36 months
Shutter At least once every 6 months
Transfer and Disposal Transfer of this source holder containing the sealed
source is only to a specifically licensed person or as
specified in OAC 3701:1-46 (an equivalent to 10 CFR
31 and 32). If you need to transfer the source holder
to another location or dispose of the source holder,
specific licensees are required.
Handling, Installation, and
Storage
You may not commission/install the source holder
into service. Only a specifically licensed person may
perform this service.
Storage When removing the device from its mounted
position, mount the cover plate on the device to
shield the beam port and keep foreign material out
of the shutter assembly.
Physical Inspection Perform physical inspections of the device and its
labeling at least once every six months for corrosion
prevention and maintenance in accordance with the
manufacturer’s instructions.