M-BUS-2 / User Manual
20
Revision 07 - 14 September 2020
Uplink number of transmission
(not displayed in the "Simple" mode) – if the "Confirmed
uplinks" function is disabled, the device will simply send each packet as many times as specified
in this option. If "Confirmed uplinks" is enabled, the device will send packets until it receives a
confirmation or until it sends as many packets as specified in this option.
TX power
(not displayed in the "Simple" mode) – the device RF transmitter power is
adjusted to this value when sending packets to the LoRaWAN network. This option can be
changed by the network server.
TX datarate
(not displayed in the "Simple" mode) – the device transmission datarate at
which it will transfer packets to the LoRaWAN network. This speed can be changed by the
network server if the ADR algorithm is enabled.
