1.
ALAR OFF: if you want to use an extension or use the unit on the line which voltage is lower than 24V? Please set the SET 7 ALAR on
ALAR OFF.
2.
ALAR ON: Anti-steal dialing function is available in this area. If someone use your line illegally, the unit will auto emit interference signal to
fail the steal dialing. Pease set the SET 7 ALAR on ALAR ON
RINGER VOLUME ADJUSTMENT
Slide the ringer switch to HI/ LOW to adjust the ringer volume according to personal preference.
P/T MODE ADJUSTMENT
Slide the switch to P/T position to select PULSE or TONE dialing mode
ANSWERING CALLS
When receiving a phone call, the telephone will detect the FSK or DTMF format and display the calling number and the LCD will be lighted for
convenient use. If this is a FSK format caller ID signal, the current date and time display will also be updated. If this is a newly coming call, the
“NEW” icon will be displayed. If the incoming call is a repeat number, the “REP”icon will be displayed. If the incoming call is a private call, the icon
---P--- will be displayed. If the incoming call is out of area, the icon ---O--- will be displayed. If a wrong number comes in, the ---E--- will be
displayed.
FROM HANDSET
1. Pick up the handset. Talk with the other end.
2. When finished, return the handset to the cradle
SWITCH TO SPEAKER PHONE
1. When using handset, press SPEAKER key then return the handset to the base
2. When finished, press SPEAKER key again.
FROM SPEAKER PHONE
1. When the unit rings, press SPEAKER key, talk to the other end.
2. When finished, press SPEAKER key again.
NOTE: To receive the Caller ID message correctly, please answer a call after the telephone rings two times.
MAKING CALLS
USING HANDSET
1. Pick up the handset, and then you will hear a dialing tone.
2. Press the desired number. The LCD will display the call duration time after 6 seconds.
3. When finished, return the handset to the cradle.
USING SPEAKER PHONE
1.
Press SPEAKER key, you can hear dialing tone
2.
Dial desired number. Talk to the other end.
3.
When finished, press SPEAKER key again
REDIAL
1.
If line is engaged
2.
Press REDIAL key for REDIAL. The telephone will dial out the pre-telephone No. automatically.
AUTO-REDIAL
When the Telephone Number which You desire to call is busy on the line, the telephone will sent out the Busy warning. Press REDIAL key one
time, the telephone will dial out the telephone No. automatically and keep on dialing until connection. And the telephone will send out the back
ringing when it is connect through.
FLASH
Press FLASH key to use to transfer phone calls when you are using a telephone exchange (PABX). The flash time can be selected from 90ms,
120ms
，
180ms
，
300ms, 600ms and 1000ms.
PAUSE
Press PAUSE key when entering a telephone number! The letter P appears on the display. On the location where you have added a pause of
3.6 second
HOLD
Press HOLD button to hold the conversation. You can now talk freely without the caller hearing you. The caller will hear a digital melody. Press
HOLD button again if you want to resume your conversation.
RECEIVE THE CALLER ID NUMBER
When receiving a phone call, the telephone will detect the FSK format and display the calling number. If this is a FSK format caller ID signal, the
current date and time display will also be updated. If this is a newly coming call, the NEW icon will be displayed. If the incoming call is a repeat
number, the REP icon will be displayed. If the incoming call is a private call, the icon ---P--- will be displayed. If the incoming call is out of area,
the icon ---O--- will be displayed. If a wrong number comes in, the ---E--- will be displayed.
You can use UP or DOWN key to check the incoming call information including number, date and time, (holding UP or DOWN key over 3
second, you can check the incoming calls very fast) and you can directly dial back with REDIAL key. If you call back a local number, press
REDIAL one time; If you call back a
long distance number and the coming call is not headed with a “0” (or the long distance code number),
