VeEX WiFi Air Expert Series User Manual Download Page 13

Page: 13 / 99

Connector: SMA (female) 50 Ohms

Note: For normal WiFi operation, use the 3x internal WiFi antennas.

MTTplus-900 WiFi Module Internal Antennas

For all WiFi operations with the exception of the Spectrum Analyzer and Locate functions, the Air Expert uses 3 internal

antennas.

Internal antenna specification:

Frequency range: 2.4 to 2.49 GHz

4.9 to 5.9 GHz

Peak Gain: 3.3 dBi @2.44 GHz,3.8 dBi at 5.2 GHz,5.4 dBi at 5.8 GHz

Go back to top

Go back to TOC

4.2 WX150 Platform Overview

For information on Basic Operations, Home menu, Test Applications, and other features specific to the V150 platform chassis,

refer to the V150 Common Functions manual.

The following sections describe basic operations for the WX150 module.

Go back to top

Go back to TOC

4.2.2 Test Port Interfaces and Antennas

4.2.2.1 Connector Panel

The connector panel located at the top of the unit comprises the following test ports:

WX150 Connector Panel

*Note: Ethernet RJ45 10/100/1000Base-T and Ethernet SFP 1000Base-X are optional interfaces and may not be available on
the connector panel.

A.*Spectrum

: Optional interface for SMA Male connector for WiFi Spectrum Analyzer.

For Spectrum Analyzer operation, refer to

Spectrum Analyzer menu

B.*Ethernet RJ45 10/100/1000Base-T

: Optional interface for 10/100/1000Base-T Ethernet test.

For Ethernet interface operation, refer to

Ethernet Setup

C. Ethernet SFP 1000Base-X

: Optional interface for fiber 1000Base-X Ethernet test.

For Ethernet interface operation, refer to

Ethernet Setup

D. 3x RP-SMA Male connectors

: Used for WiFi external antenna. External antennas are used for WX150 WiFi operation

Go back to top

Go back to TOC

4.2.2.2 WX150 Antennas

WiFiAirExpertSeries_eManual_D07-00-120P_Rev A00

Summary of Contents for WiFi Air Expert Series




































































































Search results

Summary of Contents for WiFi Air Expert Series

Reviews:

Related manuals for WiFi Air Expert Series

Brands by name

Popular brands

VeEX WiFi Air Expert Series, User Manual

Search results

Summary of Contents for WiFi Air Expert Series

Reviews:

Related manuals for WiFi Air Expert Series

Brands by name

Popular brands