VeEX WiFi Air Expert Series User Manual Download Page 11

Page: 11 / 99

4.0 Basic Operation

4.1 MTTplus Platform Overview

For information on Basic Operations, Home menu, launching Test Applications, and other features specific to the MTTplus host

chassis, refer to the

MTTplus Platform Manual

The following sections describe basic operations for the MTTplus-900 module.

Go back to top

Go back to TOC

4.1.1 Test Port Interfaces and Antennas

4.1.1.1 WiFi Module Connector Panel

The MTTplus-900 WiFi Air Expert Module connector panel is displayed in the picture below.

MTTplus-900 WiFi Module Connector Panel

*Note:

Ethernet RJ45 10/100/1000Base-T and Ethernet SFP 1000Base-X are optional interfaces and may not be available on

the connector panel.

A. *Ethernet RJ45 10/100/1000Base-T

: Optional interface for 10/100/1000Base-T Ethernet test.

For Ethernet interface operation, refer to

Ethernet Setup

B. *Ethernet SFP 1000Base-X

: Optional interface for fiber 1000Base-X Ethernet test.

For Ethernet interface operation, refer to

Ethernet Setup

C. *Spectrum

: Optional interface for SMA Male connector for WiFi Spectrum Analyzer.

For Spectrum Analyzer operation, refer to

Spectrum Analyzer menu

D. WiFi

: SMA Male connector for WiFi directional antenna. For normal WiFi operation use the 3x internal WiFi antennas.

The directional antenna is only used for the WiFi AP or Client Locate functions (refer to

4.1.1.2 MTTplus-900 Antennas

WiFi Module External Antennas

Dipole WiFi Spectrum Analyzer Antenna

WiFiAirExpertSeries_eManual_D07-00-120P_Rev A00

Summary of Contents for WiFi Air Expert Series




































































































Search results

Summary of Contents for WiFi Air Expert Series

Reviews:

Related manuals for WiFi Air Expert Series

Brands by name

Popular brands

VeEX WiFi Air Expert Series, User Manual

Search results

Summary of Contents for WiFi Air Expert Series

Reviews:

Related manuals for WiFi Air Expert Series

Brands by name

Popular brands