VeEX RXT-6200 User Manual Download Page 65

Page: 65 / 387

Errors/Alarms (Page 7)

Errors/Alarms (Page 8)

Page 8 lists the BERT Errors in logical order that are associated with the signal and payload under test. All errors are

evaluated and stored.

Errors/Alarms (Page 8)

Go back to top

Go back to TOC

7.1.3 Event Log

The Event Log tab brings up the screen listing the Error and Alarm events recorded during a test. The events are

presented in chronological sequence - number, type of event, start time, duration (alarms), and ratio/count (errors) are

displayed.

RXT-6200_RXT6000e_Module_Manual

Page 65 of 387

Summary of Contents for RXT-6200




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6200

Reviews:

Brands by name

Popular brands

VeEX RXT-6200, User Manual

Search results

Summary of Contents for RXT-6200

Reviews:

Brands by name

Popular brands