VeEX RXT-6200, User Manual

Page: 216 / 387

Ethernet Type
I-SID
Backbone VLAN ID, Priority, Type
PBB
Test: Select the test layer to perform the BERT
Options are Layer 1 Unframed, Layer 1 Framed, Layer 2, Layer 3, and Layer 4
Frame Type: Select the Ethernet frame type for Layer 2 or Layer 3
802.3 Raw (IEEE 802.3 frame without LLC) - Not available when Layer 3 is selected
802.3 LLC (IEEE 802.3 frame with LLC header)
802.3 SNAP (IEEE 802.3 frame with SNAP header)
Ethernet II (DIX) (named after DEC, Intel, and Xerox, this is the most common frame type today)
MAC/IP: Tap the MAC and IP blocks on the Frame image to access the setup menus
Set the Source and Destination MAC address for Layer 2
Set the Source and Destination MAC and IP addresses for Layer 3 and Layer 4
VLAN: Off, 1 tag, 2 tags, 3 tags
The user is able to configure up to 3 VLAN tags (VLAN stacking, for Q-in-Q applications)
VLAN stacking is an option
MPLS: Off, 1 tag, 2 tags, 3 tags
The user is able to configure up to 3 MPLS tags
MPLS tag configuration is only available when the MPLS option is purchased
The most common Ethernet Frame format, Type II
Go back to top Go back to TOC
RXT-6200_RXT6000e_Module_Manual Page 216 of 387