VeEX RXT-6000e User Manual Download Page 382

Page: 382 / 387

18.0 Profiles

Profiles can be created in any application that has a "Profiles" drop-down menu available. The SDH, OTN, Ethernet

applications all have the ability to save profiles.

Profiles can be viewed and loaded in the Profiles folder located in the Files folder structure.

Accessing and Configuring Profiles

To access the Profiles menu from the

OTN/SDH/SONET

Testing main menu, tap on the following icons:

Advanced

Mode

Profiles

. To save a new profile from the PDH or SDH applications mentioned above, select the

Save as

drop-

down option. This will bring up an alphanumeric keypad to name the profile. When the profile is saved, all of the test

configurations that apply to the particular application are saved. This allows for fast access to preconfigured test

configurations.

Alphanumeric keypad

Go back to top

Go back to TOC

RXT-6200_RXT6000e_Module_Manual

Page 382 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands