VeEX RXT-6000e, User Manual

Page: 223 / 387

BERT Setup - RX Filter selection
UDP/TCP: Input Source Port and Destination Port.
BERT Setup - RX Filter selection
Go back to top Go back to TOC
13.2.1.2 Traffic Settings
Traffic Tab
The user configures the traffic profile for the stream, including traffic flow, frame size, frame type, and transmit rate.
Traffic Flow: Select from the following traffic flows:
Constant: The selected frame is transmitted continuously according to the selected bandwidth %.
Ramp:
The selected frame is transmitted at maximum bandwidth according to the selected duty cycle and
burst period.
Burst: The selected frame is transmitted in a staircase profile according to user selectable step time,
number of steps, and maximum bandwidth.
Single Burst:
Configure the number of frames to be transmitted in the burst along with the bandwidth.
For example, if 100000 frames are transmitted at 12.5% of bandwidth, on a 1Gbps line, 100000 frames
will transmit at a rate of 125Mbps and then the burst will stop.
Frame Size Type: Fixed or Uniform min and max frame length values. Uniform traffic is traffic generated with
a uniform distribution of frame lengths.
RXT-6200_RXT6000e_Module_Manual Page 223 of 387