RTU-4000/RTU-4100 User Manual, D07-00-132P-RevA01
Page 28 of 44
Important note about Manual mode
Improper setting of the above parameters can result in erroneous test results. It is
recommended that you receive adequate training in making OTDR
measurements before using the
Manual mode.
Click
Start measurement
, after setting the test parameters. The measuring process can take up
to 3 minutes, depending on the settings. After the test is complete, an OTDR trace will appear.
Use the blue icons next to the
Start
measurement
button to view the traces as a graph or a
report. The results can be downloaded for future use also.
Resulting trace can be viewed as a graph or as a report, or downloaded
While viewing a trace you can also edit and/or add events, which is sometimes necessary for
monitoring. For more information, see Section
13.2 Editing a Reference Trace
12.1.2 Measurement history
Measurement results are saved and can be accessed at a later time to view results as graphs,
reports, or to download.
Measurement history
