Page | 7
Power Meter Mode (OPM)
-
Press the V key
or Fiber key
at the bottom left corner and choose OPM
-
Optical Power will be measured continuously by default in dBm/nW
-
Press Hold to stop any further measurements. Press Hold again to resume measuring
-
Acquiring: Press “Acquire” when you want to temporary store a measurement to be saved later on
-
You can acquire as many as you want before saving the list of acquired measurements
-
Setting a Reference Level: press “dB>Enter” to enter manually the reference level value you want, or you can
use a current reading as a reference value by pressing “Set” instead
-
Saving Results: Go to the Table tab and you will see the list of acquired measurements that you took earlier.
Tick the ones that you want to go into a file and then click “Save”
-
To recall/browse/export saved results go to “Results” tab
