VeEX MTTplus, User Manual

Page: 44 / 66

BSSID (MAC address) of the AP
802.11 protocol version supported by the AP
Max data rate supported by the AP
AP's radio channel number
Lock symbol indicates if security is set on the AP (WEP, WPA or WPA2).
When the AP is unsecured, no lock symbol is displayed
Signal strength of the AP
Select one of the Access Points (AP) to start a connection. If the AP is locked, a network key is required to complete the
connection. The key can either be 10 characters or 26 characters.
Note : If the user enters the wrong network key, the test set will still connect to the Access Point, but will not be able to
connect to the web or perform the Ping test.
Once selected, an
Edit Settings
function key appears on the right hand side bar.
Tap on
Edit Settings
or
Connect AP
to change the Encryption Type and enter the WiFi Key.
Encryption Type:
Supported encryption types include WEP, WPA, and WPA2.
Key:
Security phrase or password necessary to access SSID and network. Tap the
Key
field to enter the AP password on
the pop-up keypad.
ASCII formatting supported
The password/phrase can be hidden (
Global Settings
>
Show Password
>
Yes/No
)
Note : Passwords are case sensitive.
Hit
Apply
after selecting the Encryption Type and entering the Key. If the encryption menu was accessed via
Edit Settings
,
press
Connect AP
to connect to the AP. If the encryption menu was accessed via
Connect AP
, the test set will automatically
connect to the AP after hitting Apply.
WiFi Wiz - AP Encryption Settings
Connect
The
Setup
Tab displays the Profile, ESSID, Encryption Type and Password.
WiFi Wiz Connection Setup
MTTplus e_Manual D07-00-096P RevA00 Page 44 of 66