VeEX MTTplus-523, User Manual

Page: 7 / 27

4.0 Basic Operation
For information on Basic Operations, Home menu, Launching Test Applications, and other features specific to the MTTplus Host
Chassis, refer to the
MTTplus Platform Manual
. The following sections describe basic operations for the MTTplus-523 module.
4.1 Touch-Screen Display
The LCD supports touch-screen operation. To operate the touch-screen, use the stylus located in the top cover to navigate the
menus and tabs. Please observe the following precautions:
Never use excessive pressure on the touch-screen as this may damage its functionality.
Never use sharp objects such as a pen, screwdriver etc. as this may damage the surface.
Clean the surface of the touch screen using a soft cloth and mild detergent only. Do not use alcohol.
Go back to top Go back to TOC
4.2 Battery
The MTTplus chassis is equipped with an intelligent Li-ion rechargeable battery pack which is located in the rear of the unit. The
battery will be partially charged upon delivery, so it is recommended to charge the battery fully before use. Please charge the
battery at room temperature to preserve its life and to obtain maximum charge. The battery is charged during operation provided
the unit is connected to the AC Mains using the supplied AC adapter. Removing the battery, while the unit is powered on is not
recommended - this may result in damage. Charge the battery by connecting the AC Main adapter to the power jack on the left
side.
Go back to top Go back to TOC
4.3 Connector Panel
Connector Panel
The MTTplus-523 module supports CPE mode:
RJ11 LINE interface for G.fast and DSL
RJ45 Ethernet Port, for DSL to PC Pass Through mode
Go back to top Go back to TOC
MTTplus-523_e-manual, D07-00-117P RevA00