VeEX MPA, User Manual

Page: 466 / 842

SDH Tab
466
•
Change Scale - Compresses or expands the displayed time scale for the
graphed errors and alarms at time intervals of 30 minutes, 90 minutes, 3
hours, 6 hours, 12 hours, 24 hours, or 72 hours.
•
Change Upper - Sets the type of errors or alarms that appear in the upper
graph.
•
Change Lower - Sets the type of errors or alarms that appear in the lower
graph.
•
Shift Left and Shift Right - Adjusts the graph's time scale to an earlier or
later time.
•
Print Report - Prints a graph report to printer or file.
•
Save Graphs - Saves a graph to file as a .grp file that can be replayed at
a later time.
Important: This is not a text file; when replayed, it appears as the
original graph plot. Choose Print a Graph to Report if you desire graph
information that can be printed out.)
•
Replay Graphs/Stop Replay - Replays or stops saved graph (.grp) files.
Shift Left and Shift Right
Use these buttons to adjust the graph's time scale to an earlier or later time.
•
Selecting Shift Left moves the graph's reference cursor to the left and displays
earlier events.
•
Selecting Shift Right move the graph's reference cursor to the right and displays
later events.
You may also adjust the graph's time scale by using your finger and dragging the
reference cursor to the desired time scale. As you drag the reference cursor, the Track
Time field will reflect the period of time you are selecting and displays the errors and
alarms that occurred during that time. An example of an SDH graphing results is shown
below.
MPA_e_manual_D07-00-129P_RevA00