VeEX MPA, User Manual

Page: 177 / 842

Protocol Tabs
177
Click the User Image File button to open a File Browser window.
When printing/saving the report using the DLI Remote Client GUI, then the
image file must be copied to the C:\Program
Files\DLI\RemoteClient\Compat<feature set> folder before selecting Print Report.
For the best appearance quality the image file should have a width to height
ratio of 5:1 , with a maximum dimension size of 750px by 150px .
6. Select OK to begin Printing or Saving the specified report.
7. If printing to a Text File, Delimited, or PDF File, then the File Browser dialog box
opens, allowing you enter a report file name.
Select File Name , and using the Key board screen that appears, enter the File
Name of your choosing.
Enter a file name and select OK .
File names cannot include special characters or any spaces .
The File Extension will automatically be entered, based on the report type
selected. PDF files will also include a .PDF extension.
Most Reports will automatically be assigned a file name consisting of ( <type of
report>_<mmddyyyy>_<hhmmss>.<file extension>)
Ex. set_03092017_155039.pdf
8. For instructions on viewing saved report files see Printing or Viewing Saved
Files .
OTN Tab
OTN Tab Overview
The test options available under the OTN (Optical Transport Network) protocol
processor tab can vary from one card type to another, depending on the test options
supported and actively licensed.
MPA_e_manual_D07-00-129P_RevA00