The VPAL is equipped with an intelligent Lilon rechargeable battery pack which is located in the rear of the unit. The battery will be
partially charged upon delivery, so it is recommended to charge the battery fully before use. Please charge the battery at room
temperature to preserve its life and to obtain maximum charge. The battery is charged during operation provided the unit is
connected to the AC Mains using the supplied AC adapter. Removing the battery, while the unit is powered on is not
recommended - this may result in damage. Remove the rubber cover on the left side to connect the AC Main adapter to the unit.
4.4 Connectors and Panels
Test Ports:
Optical Power Meter (OPM) test port:
To access the optical test interface, please open the top connector cover.
An universal 2.5mm optical adaptor allows you to connect the test set to the fiber optic network using one of the optical fiber
patchcords or adaptors supplied with the instrument.
RJ45, 10/100Base-T port:
To connect to an Ethernet network - Test applications include;
IP connectivity testing
Net Wiz testing
WiFi Wiz testing
Voice over IP (VoIP) testing
IPTV testing
Transfer measurement results and test profiles between the instrument and a computer using ReVeal LX software
Upload/download channel tables between the instrument and a computer using ReVeal LX software
Upgrade the instrument software using ReVeal LX software
Remote control of the instrument using ReVeal LX software (optional)
USB Utility Ports:
To access the USB ports, remove the protective rubber cover on the right hand side of the unit to expose the connectors;
LX100 e-Manual D07-00-019 Rev A01
Page 6 of 44
