5.2.4 Web Test
Web Test is used to verify that the internet is properly provisioned at the service point.
Web Test:
Select Test from Web Mode
Enter or select the desired IP address or URL destination, the repetition time, then press ‘Start.’
The result is a simple Pass Fail indication and basic information pertaining to the throughput and transfer rate.
LX100A Web Test setup
LX100A Web Test result
Web Browser:
Select Browser from Web Mode
Enter or select the desired IP address or URL destination, and encoding, and then press ‘Start.’
The screen will turn blank while launching the spider web browser engine.
The web page is divided into quadrants. Use the slide keys to navigate up/down and left/right.
LX100 e-Manual D07-00-019 Rev A01
Page 12 of 44
