FX86 CWDM Quad Laser Source User Manual
Page 9 of 17
5.0 Getting Started
Please note that FX86 works with a power meter calibrated to one of the FX86 laser
wavelengths. For the power meter operations, see its manual.
Before using the FX86 CWDM quad laser source for the first time, fully charge the battery and
set the local date and time.
5.1 Battery
The unit is equipped with a built-in, rechargeable Li-Polymer 3A, smart charge battery and it is
partially charged upon delivery. However, VeEX recommends charging the battery to full
capacity before using the test unit for the first time.
The device is powered from the built-in Li-Polymer battery and can be operated
with the AC/ DC adaptor plugged in.
When the test unit is plugged into AC/DC power, the Plugged icon ( ) appears on the top left
corner of the display. When the unit is operating on the internal battery, the Battery icon ( )
appears.
It is recommended to charge the battery at room temperature to preserve its life
and to obtain maximum charge.
To charge the test unit, connect the AC/DC adaptor supplied with the unit to the micro-USB
service port located on the left side of the device. The battery charging time depends on the
battery condition and ambient temperature. Only use the cables provided with the device to
charge the battery.
Important: The Li-Polymer battery is designed for maximum safety. However, the
battery may explode, leak or catch fire when:
•
It is exposed to high temperatures or fire.
•
It is opened or dismantled.
The test unit provides up to 35 hours of battery time when operating in Broadband OPM mode
and up to 25 hours when operating in FTTx PON mode. An auto-off feature, configured in the
Settings mode, powers down the unit when a low battery condition is reached.
5.1.1 Battery Replacement
Battery replacement in the field is not authorized or permitted. The unit must be returned to an
authorized VeEX service center or partner for repair.
