Veesta World V-PM1000 Series Page 29 User Manual Download | Manualshive

Page: 29 / 46

background image

VP-1405A Advanced Power

Chapter 5 - Panel Operation

V-PM1000 Series, Veesta Power Module Product Series

48V Power Supply & Charger Instructions & User's Manual

Page 29 of 46

All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization.

5.2

Status Indications

There are some LED in front panel, each of them show a special
conditions:

5.2.1

Power LED

The Power LED shows the condition of on stage of module. If this
LED be off it means the device has lost input power or generally
damaged.

5.2.2

Charging LED

This green LED correspond to battery charging indication, when the
battery is charging, it is on. When the battery is discharged or when
the battery is activated, it is off.

5.2.3

Discharge LED

This red LED correspond to battery discharge indication, when the
battery is discharged or when the battery is activated, it is on. When
the battery is charged and the battery is finished discharging, it is off.

5.2.4

Activation LED

This is yellow color LED, when the battery is activated, it is on.
Otherwise it is off.

5.2.5

Undervoltage LED

This is red color LED, when the battery or power supply output is
under-voltage, it is on. Otherwise it is off.

5.2.6

Failure LED

This is red color LED, when the power output is overvoltage, the fault
light is on. Otherwise it is off.

5.3

Key Button Functions

5.3.1

Activation buttons

By  press  the  Activation  ON  button  to  enter  the  battery  activation
state.  Meanwhile,  the  discharge  indicator  light  is  on  and  the  battery
discharges  to  the  load.  You  can  manually  press  the  Activation  OFF
button  to  exit  the  battery  activation;  otherwise  the  power  supply  will
automatically complete the battery activation.

5.3.2

Battery buttons

The external battery input system of this product needs to have input
voltage trigger, otherwise it can not be directly put into the system to
supply power to the  load. When  the project  is shakedown  testing or
battery  first  connected  and  no  input  power,  press  the  Battery  ON
button, the load is powered by the battery. At this time, the discharge
indicator is on.

«
...
27
28
29
30
31
...
»

Summary of Contents for V-PM1000 Series















































Reviews:

No comments

Related manuals for V-PM1000 Series

Green Motion Building

Brand: Eaton Pages: 20

Green Motion Building

Brand: Eaton Pages: 12

Brand: NDS Pages: 24

V-CHARGE 100 DUO

Brand: VOLTCRAFT Pages: 236

Brand: Fein Pages: 161

Brand: XS Power Pages: 16

Brand: Alpina Pages: 164

Brand: patura Pages: 16

Brand: H-Tronic Pages: 7

Brand: Draper Pages: 22

Brand: GP Pages: 32

UPOWER Ecoline UE-24Li50

Brand: Master Battery Pages: 6

Brand: RAWLINK Pages: 50

Brand: Craftsman Pages: 18

PA-BEK-001CG/WR

Brand: Brother Pages: 6

Ecoline UE-36Li80

Brand: UPOWER Pages: 7

Brand: Sunoptic Surgical Pages: 36

Brand: Insignia Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands