Troubleshooting
Boot-Up Errors
12
BOOT-UP ERROR 1
Figure 5. Mode Jumper J36 Operating Mode Position
Table 3. Incorrect Boot-Up Sequence - Missing Serial 2
Boot-Up Sequence
Visual Sequence
Symptom
Probable Cause
Action
1. Console powered On at the
breaker
Only Serial Port 1 is
available
Menu>Setup>Com
-
munication>Serial
Port setup.
Mode jumper J36
(Item 1 in Figure 3) is
not in the Operating
Mode position.
Remove the console’s
cover and the Display/
CPU assembly follow
-
ing the assembly
removal steps begin
-
ning on page 26.
Move the Mode
jumper J36 on the CPU
board to the Operating
Mode position (on the
2nd and 3rd pins from
the left) as shown in
2. - 5. The console follows the
normal boot up sequence,
slower than normal - Green
LED On Steady and the desig
-
nated Home screen displays
System Status
08/02/2013 01:01 PM
Tank Overview
0 Warning(s)
0 Alarms(s)
Print (0)
Home
Favorites
Menu
Actions
Overview
J36
J36
