80
Accessing The TLS2P Web Server
Once the TLS2P has been installed and setup, you can access the TLS2P web server via a Wide Area Network
(WAN); or by connecting your laptop directly to the TLS2P.
Connecting to the TLS2P in a WAN
What you will need:
•
The IP address and host port number of the TLS2P (see your network administrator)
Connection Procedure:
1. Enter the IP address and host port of the TLS2P in the address window of your in browser , e.g,
12.2.1.120:10001 and click the go-to button. You should see the TLS2P Home screen.
Connecting a Laptop Directly to the TLS2P
What You Will Need:
•
Ethernet crossover cable
•
IP address of TLS2P
•
A Static IP address for laptop.
1. Connect your laptop to the TLS2P as shown in Figure 1. Go to your laptop’s Control Panel folder and doubleclick
the ‘Network and Dial-up Connections’ icon.
Figure 1. Direct Connection
2. Select
Local Area Connection
and the status screen displays (Figure 2).
con
s
ole
s
\tl
s
2\960-22.ep
s
1
3
4
2
Legend for Numbered Boxes
1
Plugs into RJ45 Ethernet connector in
Laptop.
2
Laptop
3
You MUST use an Ethernet crossover cable!
4
Plugs into RJ45 connector in bottom of console