Connecting Probe/Sensor Wiring to Consoles
TLS-
3
50/ProMax/EMC Consoles
70
PUMP RELAY MONITOR MODULE - POWER BAY
The Pump Relay Monitor Module can accept ac inputs from the STP’s Remote Control Box [Figure 68].]
For each STP to be monitored, connect a shielded cable consisting of two #14 AWG conductors to the
appropriate input terminals on the module.
Figure 68. Pump Relay Monitor Module Wiring
Console
consoles\prmodulerj2.eps
INPUT R ATING
240 VA C
0.15 AMP MAX
PUMP RELAY MONITOR MODULE
PI PR PI PR PI PR PI PR
PUMP
1
2
3
4
External
ac Input
Wiring
#14 AWG
External
ac Input
Wiring
#14 AWG
Attach Cable Shield to Ground
Lug Closest to Conduit Entry
Shielded
Cables
Rigid Conduit (enters
Console through a
Power Bay knockout)
Up to 4
pumps
M1 M2
M1 M2