Special Mag Probe Installation Kits
Vapor Extraction Riser Kit w/ Coupling Adaptor
20
Vapor Extraction Riser Kit w/ Coupling Adaptor
This kit contains parts needed to install a Mag Probe into a Vapor Extractor Riser that has a Coupling Adapter
(parts listed in Table 3 and shown in Figure 13):
Figure 13. Mag Probe Vapor Extractor w/Coupling Adaptor Installation Kit
Table 3.
Vapor Extraction Riser Kit (w/ coupling adaptor) - Part No. 846500-001
Quantity
Description
Part Number
2
Wire Nut
576008-461
1
Cable Tie
576008-482
1
Splice Enclosure
514100-357
1
Splice Kit Instructions Manual
576013-861
1
PG7 / 1/4” Cord Grip Fitting
576008-637
1
Modified OPW Adaptor
331448-001
1
Shield -Fitting
331449-001
1
4” Hose Clamp
576008-638
12 inches
Flex Conduit
576008-294
probes\vapradpt.eps
1/4 NPT tapped hole
for cord grip fitting
Modified OPW
Adaptor
Fitting - PG7 / 1/4" NPT Cord Grip
Shield - Fitting
4" Hose Clamp
12 Inches Flexible Conduit
Splice Enclosure
Cable Tie
Wire Nuts
O-ring
Threaded Fitting
Nylon Splined Bushing
Dome Nut
This end
screws
into OPW
Adaptor