Installation
Fuel Conditioner (FC) Installation
20
Figure 20. WID Hose Connections
5. Place the flaretite seal from the kit onto the 3/8” JIC male end of the tank return adapter fitting. Attach the 3/8”
JIC elbow female fitting end of the hose to the 3/8” JIC male drain adapter fitting. Attach the 1/2” JIC straight
end of the hose to the fitting marked ‘T’ on the front of the FC Manifold (see Figure
19). Tighten the fittings at
both ends of the hose.
6. Place the flaretite seal from the kit onto the male 1/2” JIC elbow fitting labeled ‘W’ on top of the FC manifold
(see Figure
19) and attach the 1/2” JIC straight end of the hose to it. Place the flaretite seal from the kit onto
the male 1/2” JIC straight fitting on top of the WID flange (Figure
20) and attach the 1/2” JIC elbow fitting of
the hose to it (see Figure
9). Tighten the fittings at both ends of the hose.
