Introduction
Safety Symbols
3
If the EMR4 Display Head will be installed in an application other than replacing a V-R Mechanical Meter Register,
you must also have the Veeder-Root approved installation kit for that meter.
The 300 series installation kits, include the necessary meter connection parts as well as
35 feet of communications cable for a typical truck application. A printer cable kit - 10’,
845900-313, and temperature probe kit, 845900-302, will need to be selected if required.
• Kit - installation for Tokheim, Daniels, Energy Flow Systems (Donovan) - Temp Comp (P/N 845900-304)
• Kit - installation for Smith - Temp Comp (P/N 845900-305) Satam, Avery Hardoll, Alfons Haar, Petrol
Instruments
• Kit - installation for Liquid Controls, SAMPI, Total Controls Systems - Temp Comp (P/N 845900-306) Tuthill
• Kit - installation for 1-1/2” - 4” Neptune/Liquatech with existing mechanical Temp Comp - Temp Comp (P/N
845900-308)
• Kit - installation for 1-1/2” - 4” Neptune/Liquatech with no existing mechanical Temp Comp - Temp Comp (P/N
845900-309)
• Kit - installation for Brodie Brooks - Temp Comp (P/N 845900-327)
• Kit - Installation for 3/4” and 1” Neptune/Liquatech with existing mechanical Temp Comp (P/N 845900-010)
• Kit - Installation to retrofit 3/4” and 1” Neptune/Liquatech with electronic Temp Comp (P/N 845900-310)
Safety Symbols
The following safety symbols may be used throughout this manual to alert you to important safety hazards and
precautions.
EXPLOSIVE
Fuels and their vapors are extremely explo-
sive if ignited.
FLAMMABLE
Fuels and their vapors are extremely flammable.
TURN POWER OFF
Live power to a device creates a potential
shock hazard. Turn Off power to the device
and associated accessories when servicing
the unit.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
NOTICE
Alerts the user to practices not related to
physical injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NO OPEN FLAMES
Open flames from matches, lighters, welding
torches, etc. can ignite fuels and their
vapors.
INJURY
Careless or improper handling of materials can result
in bodily injury.
GLOVES
Wear gloves to protect hands from irritation
or injury.
WEAR EYE PROTECTION
Fuel spray from residual pressure in the lines can
cause serious eye injuries. Epoxy sealant can cause
eye injury. Always wear eye protection when working
with pressurized lines and epoxy mixtures.
READ ALL RELATED MANUALS
Knowledge of all related procedures before
you begin work is important. Read and
understand all manuals thoroughly. If you do
not understand a procedure, ask someone
who does.
NOTICE
OFF
WARNING
NOTICE
CAUTION
