EMR
3
Setup and Operation Manual
C&C Mode Setup Categories
34
FUEL SOURCE
Figure 37 illustrates Fuel Source setup in C&C Mode. If you are going to make temperature compensated
deliveries, before performing Fuel Source setup, you must select either coefficient (of expansion) or density as the
temperature compensation method in Delivery Options setup (see Figure 47).
Figure 37. Fuel Source Setup
Meter ID
Figure 38 illustrates Meter ID setup choices.
Figure 38. Meter ID Setup
Input Type
Figure 39 illustrates Input Type setup choices. Quadrature is the default input type.
FUEL SOURCE
METER CALIBRTN
CONFIGURE I/O
OEM MESSAGE
DELIVERY OPTIONS
REPORT FORMATS
RESTART
SECURITY CODE
LANGUAGE
DISPLAY SYNTAX
TEMPERATURE
METER ID
INPUT TYPE
PROD DSCRPT X
Press ENTER to accept any changes in any column -
and/or continue pressing to return to FUEL SOURCE
SEE FUEL SOURCE
FIGURES FOR SELECTIONS
+
-
+
-
+
Press the up/down
buttons to cycle
through remaining
C/C Mode categories
NEXT
ENTER
NEXT
Press ENTER to accept
choice and return to
METER ID.
Press ENTER to return
to FUEL SOURCE
ENTER
ENTER
METER ID
GENERIC 12345
NEXT
Make your changes to
the ID, pressing up/down
arrows to scroll through
the alpha-numeric
selections, and NEXT to
move from one character
of the ID to the next.
