Veeco Dimension 3100, Manual

Page: 58 / 376

Facilities Requirements
Optional Configurations
38 Dimension 3100 Manual Rev. D
3.1 Optional Configurations
The following are typical configurations for the Dimension 3100 Scanning Probe Microscope,
detailing options for acoustic and mechanical vibration isolation, as well as various options for
positioning the control station (computer, control electronics, and accessories). Facilities
requirements depend on what type of configuration is used.
3.1.1 VT-103-3K with ELCON
This configuration has two basic elements: the VT-103-3K, which is an integrated air table and
acoustic hood for vibration isolation, and the ELCON (electronics console) which is an optional
small footprint/compact console (see
Figure 3.1a ). The VT-103-3K is comprised of an air table, on
which the Dimension 3100 microscope rests (not shown) and an acoustic hood which can be raised
to access the instrument, and lowered to seal the instrument during operation. The ELCON is a
compact control station console used to house the computer and control electronics underneath, and
the monitors, mouse and keyboard on top. The VT-103-3K and the ELCON do not require one
another and can be used independently.
Figure 3.1a VT-103-3K with ELCON
4001