Veeco Dimension 3100, Manual

Page: 54 / 376

Safety
Software Power-up
34 Dimension 3100 Manual Rev. D
Figure 2.8b Logon Window
2.8.3 Start the NanoScope Software
Go to the desktop and click on the NanoScope icon or select the D:\SPM\z.exe file to start the
NanoScope software (see Figure 2.8c ).
Figure 2.8c Select the NanoScope Icon
2.8.4 Select Realtime
Click the Realtime icon, or select Realtime from the
DI
menu (see Figure 2.8d ). The system
automatically initializes for approximately one minute.
Figure 2.8d Select the Realtime Icon
The stage may need to be initialized any time the system or one of its components has been
powered-down. This allows the stage controller and computer to locate home positions and reset
the coordinate system of the stage. If the Focus Surface and Locate Tip icons are
grayed out, the stage needs to be initialized.
User Name:
Password:
Nanoscope
Logon Information
1364-915-A
Enter “Nanoscope”
Leave Blank
Realtime Icon