VEDUM Air vents, Instruction Manual, Page: 47 / 66

48
6. Installation of details
6.10 PUSH FUNCTION FOR DOORS (HANDLE-FREE)
klick
K PUSH TECH
WITH MAGNET
for cabinets using
or
negative hinges
INSTALLATION TO BE EMBEDDED INSIDE THE PANEL
VERSIONS
INSTALLATION THROUGH ADAPTER HOUSING WITH MAGNET
for cabinets using
or
negative hinges
VERSIONS
K PUSH TECH is the fully renewed and extended program of automatic opening systems
for doors without handles or knobs.
A special inner mechanism provides a very silent, yet powerful utilization, granting a long
durability which makes it perfectly suitable for a wide range of doors.
K PUSH TECH is available with bu r, for cabinets using sprung hinges, and with magnet,
for cabinets using unsprung hinges or negative hinges. The aesthetic of bu is now
improved and the range of catch plates for version with magnet is even wider.
It comes with a fresh new and even more captivating design, together with an extended
program, including an innovated range of spring strengths, in order to guarantee the
correct functioning even with large and heavy doors, and three lengths of the output paths:
Short – 14,5 mm, Medium – 20 mm, Long – 37 mm.
The same reference can be installed either concealed or visible, fi xed with adapter housing.
The visible versions’ package is composed of: push-to-open system, adapter plate and
adapter housing. The new adapter housing allows to pre-install
K PUSH TECH with the
plate on the side of the cabinet and leave the ejector pin deactivated during its handling
and transportation.
The suitability of the small adapter housing for both short and medium size versions
guarantees a simplifi ed stock management.
It comes with a wide range of colors: white, grey 19 and black anthracite.
Gap between door and cabinet is reduced: activation gap is 1,4 mm. Ring thickness is 0,6 mm.
Montera med 2 st
försänkt träskruv
ø 3,5x16 mm.
PUSH CATCHES
AND MAGNETIC
CATCHES
K PUSH TECH
Ø3 x 3
24,5 26,5
32 19
37
8 min.
78,3
14,4
13,2
Ø5 24,5 26,5
37
8 min.
14,4
57010040 EE
57010040 IJ
57010040 AB
EP
= 100 pcs.
= Ø 2,5 mm
1 2 3 4
EP
= 100 pcs.
= Ø 5 mm
1 2 3 4
78,4
16
13,3
57010020 EE
57010020 IJ
57010020 AB
EP
= 100 pcs.
1 2 3 4
ADAPTER HOUSING AND PLATE FOR LONG VERSION
SIDA
1 (1)
UTGÅVA
3
DATUM
2019-10-14
ART NR
39043 / 508014
PUSHÖPPNING
CATCHES
K PUSH TECH
klick
klick
K PUSH TECH
INSTALLATION TO BE EMBEDDED INSIDE THE PANEL
INSTALLATION THROUGH ADAPTER HOUSING
K PUSH TECH is the fully renewed and extended program of automatic opening
for doors without handles or knobs.
A special inner mechanism provides a very silent, yet powerful utilization, granting
durability which makes it perfectly suitable for a wide range of doors.
K PUSH TECH is available with bu r, for cabinets using sprung hinges, and with
for cabinets using unsprung hinges or negative hinges. The aesthetic of bu
improved and the range of catch plates for version with magnet is even wider.
It comes with a fresh new and even more captivating design, together with an extended
program, including an innovated range of spring strengths, in order to guarantee
correct functioning even with large and heavy doors, and three lengths of the output
Short – 14,5 mm, Medium – 20 mm, Long – 37 mm.
The same reference can be installed either concealed or visible, fi xed with adapter housing.
The visible versions’ package is composed of: push-to-open system, adapter plate
adapter housing. The new adapter housing allows to pre-install
K PUSH TECH
plate on the side of the cabinet and leave the ejector pin deactivated during its handling
and transportation.
The suitability of the small adapter housing for both short and medium size versions
guarantees a simplifi ed stock management.
It comes with a wide range of colors: white, grey 19 and black anthracite.
Gap between door and cabinet is reduced: activation gap is 1,4 mm. Ring thickness is 0,6 m
Montera med 2 st
försänkt träskruv
ø 3,5x16 mm.
K PUSH TECH
PATENT PENDING
REGISTERED DESIGN
2 min.
2 min.
+6
-0,45
7,5 max.
37 long version
20 medium version
14 short version
WITH MAGNET
for cabinets using
unsprung hinges
or negative hinges .
For details refer to
“K PUSH TECH AND
K LOCK DOOR PLATES“.
For details refer to
“K PUSH TECH AND
K LOCK DOOR PLATES“.
WITH BUFFER
for cabinets using
sprung hinges .
VERSIONS
ADJUSTMENTS
Door plate
Door plate
2 min. 1,4 min.
+6
-0,45
WITH MAGNET
for cabinets using
unsprung hinges
or negative hinges .
WITH BUFFER
for cabinets using
sprung hinges .
ADJUSTMENTS VERSIONS
automatic opening systems
utilization, granting a long
hinges, and with magnet,
of bu is now
oved and the range of catch plates for version with magnet is even wider.
with an extended
to guarantee the
the output paths:
adapter housing.
adapter plate and
K PUSH TECH with the
during its handling
medium size versions
ness is 0,6 mm.
Increased adjustment feature: +6 / -0.45 mm. Beyond this negative adjustment the spring
is deactivated. This feature allows to disable the ejector pin for safety reasons.
Perception of steps indicating the adjustment of the ejector pin: every step-stop position
adjusts the door gap by 0.15 mm. A click-stop indicates the maximum adjustment range.
These features prevent any undesired change of position of the ejector pin during its
utilization.
Reduced depth of drill hole (10 mm less) for the long concealed version.
Full-automatic mounting templates, bringing a signifi cant advantage in productivity.
Possibility of installation in tight drill-holes
- Perfect functioning assured even with hole diameters with small tolerance.
New adapter housing
- The new adapter plates suit with current drilling pattern.
- The fi xing of the adapter plate can be carried out with common self-tapping fl at head
screws and euro screws.
- The adapter plate can be used as template for the spot-drilling.
Highest magnet strength available in the market.
New high performing materials to withstand unusual stresses and to avoid parts’ damages.
The new magnets are installed completely fl ush with the head of the ejector pin, in order to
avoid any scratches on the door plates.
PATENT PENDING, REGISTERED DESIGN
TECH
PATENT PENDING
REGISTERED DESIGN
2 min. 2 min.
+6
-0,45
7,5 max.
37 long version
20 medium version
14 short version
WITH MAGNET
for cabinets using
unsprung hinges
or negative hinges .
For details refer to
“K PUSH TECH AND
K LOCK DOOR PLATES“.
For details refer to
“K PUSH TECH AND
K LOCK DOOR PLATES“.
WITH BUFFER
for cabinets using
sprung hinges .
VERSIONS
ADJUSTMENTS
Door plate
Door plate
2 min. 1,4 min.
37 long version
20 medium version
14 short version
+6
-0,45
7,5 max.
WITH MAGNET
for cabinets using
unsprung hinges
or negative hinges .
WITH BUFFER
for cabinets using
sprung hinges .
ADJUSTMENTS VERSIONS
opening systems
granting a long
hinges, and with magnet,
bu is now
r.
an extended
guarantee the
output paths:
adapter housing.
adapter plate and
PUSH TECH with the
during its handling
size versions
ss is 0,6 mm.
www.italianaferramenta.com
Increased adjustment feature: +6 / -0.45 mm. Beyond this negative adjustment the spring
is deactivated. This feature allows to disable the ejector pin for safety reasons.
Perception of steps indicating the adjustment of the ejector pin: every step-stop position
adjusts the door gap by 0.15 mm. A click-stop indicates the maximum adjustment range.
These features prevent any undesired change of position of the ejector pin during its
utilization.
Reduced depth of drill hole (10 mm less) for the long concealed version.
Full-automatic mounting templates, bringing a signifi cant advantage in productivity.
Possibility of installation in tight drill-holes
- Perfect functioning assured even with hole diameters with small tolerance.
New adapter housing
- The new adapter plates suit with current drilling pattern.
- The fi xing of the adapter plate can be carried out with common self-tapping fl at head
screws and euro screws.
- The adapter plate can be used as template for the spot-drilling.
Highest magnet strength available in the market.
New high performing materials to withstand unusual stresses and to avoid parts’ damages.
The new magnets are installed completely fl ush with the head of the ejector pin, in order to
avoid any scratches on the door plates.
PATENT PENDING, REGISTERED DESIGN
klick
K PUSH TECH
INSTALLATION TO BE EMBEDDED INSIDE THE PANEL
INSTALLATION THROUGH ADAPTER HOUSING
K PUSH TECH is the fully renewed and extended program of automatic opening systems
for doors without handles or knobs.
A special inner mechanism provides a very silent, yet powerful utilization, granting
durability which makes it perfectly suitable for a wide range of doors.
K PUSH TECH is available with bu r, for cabinets using sprung hinges, and with magnet,
for cabinets using unsprung hinges or negative hinges. The aesthetic of bu
improved and the range of catch plates for version with magnet is even wider.
It comes with a fresh new and even more captivating design, together with an extended
program, including an innovated range of spring strengths, in order to guarantee
correct functioning even with large and heavy doors, and three lengths of the output
Short – 14,5 mm, Medium – 20 mm, Long – 37 mm.
The same reference can be installed either concealed or visible, fi xed with adapter housing.
The visible versions’ package is composed of: push-to-open system, adapter plate
adapter housing. The new adapter housing allows to pre-install
K PUSH TECH
plate on the side of the cabinet and leave the ejector pin deactivated during its handling
and transportation.
The suitability of the small adapter housing for both short and medium size versions
guarantees a simplifi ed stock management.
It comes with a wide range of colors: white, grey 19 and black anthracite.
Gap between door and cabinet is reduced: activation gap is 1,4 mm. Ring thickness is 0,6 m
klick
klick
INSTALLATION TO BE EMBEDDED INSIDE THE
INSTALLATION THROUGH ADAPTER HOUSING
improved and the range of catch plates for version with magnet is even wide
It comes with a fresh new and even more captivating
program, including an innovated range of spring
correct functioning even with large and heavy doors,
Short – 14,5 mm, Medium – 20 mm, Long – 37 mm.
The same reference can be installed either concealed
The visible versions’ package is composed of:
adapter housing. The new adapter housing allows
plate on the side of the cabinet and leave the
and transportation.
The suitability of the small adapter housing
guarantees a simplifi ed stock management.
It comes with a wide range of colors: white, grey 19 and black anthracite.
Gap between door and cabinet is reduced: activat
PUSH CATCHES
AND MAGNETIC
CATCHES
K PUSH TECH
10 70
37 68,4
0,6
10 70
37
68,4
0,6
57008040 EE
57008040 IJ
57008040 AB
ST EP
= 100 pcs.
1 2 3 4
57008080 EE
57008080 IJ
57008080 AB
ST EP = 100 pcs.
STRONG VERSION
1 2 3 4
SR
SR
PUSH CATCHES
AND MAGNETIC
CATCHES
K PUSH TECH
Ø3 x 3
24,5 26,5
32 19
37
8 min.
78,3
14,4
13,2
Ø5 24,5 26,5
37
8 min.
57010040 EE
57010040 IJ
57010040 AB
EP
= 100 pcs.
= Ø 2,5 mm
1 2 3 4
= Ø 5 mm
78,4
16
13,3
57010020 EE
57010020 IJ
57010020 AB
EP
= 100 pcs.
1 2 3 4
ADAPTER HOUSING AND PLATE FOR LONG VERSION
PATENT PENDING
REGISTERED DESIGN
2 min.
+6
-0,45
7,5 max.
For details refer to
“K PUSH TECH AND
K LOCK DOOR PLATES“.
For details refer to
“K PUSH TECH AND
K LOCK DOOR PLATES“.
WITH BUFFER
for cabinets using
sprung hinges .
ADJUSTMENTS
Door plate
Door plate
1,4 min.
+6
-0,45
7,5 max.
WITH BUFFER
for cabinets using
sprung hinges .
ADJUSTMENTS
www.italianaferramenta.com
-0.45 mm. Beyond this negative adjustment the spring
e allows to disable the ejector pin for safety reasons.
adjustment of the ejector pin: every step-stop position
click-stop indicates the maximum adjustment range.
undesired change of position of the ejector pin during its
Reduced depth of drill hole (10 mm less) for the long concealed version.
Full-automatic mounting templates, bringing a signifi cant advantage in productivity.
Possibility of installation in tight drill-holes
ed even with hole diameters with small tolerance.
- The new adapter plates suit with current drilling pattern.
can be carried out with common self-tapping fl at head
- The adapter plate can be used as template for the spot-drilling.
ength available in the market.
withstand unusual stresses and to avoid parts’ damages.
completely fl ush with the head of the ejector pin, in order to
avoid any scratches on the door plates.
PATENT PENDING, REGISTERED DESIGN
klick
PATENT PENDING
REGISTERED DESIGN
2 min. 2 min.
+6
-0,45
7,5 max.
37 long version
20 medium version
14 short version
WITH MAGNET
for cabinets using
unsprung hinges
or negative hinges .
For details refer to
“K PUSH TECH AND
K LOCK DOOR PLATES“.
For details refer to
“K PUSH TECH AND
K LOCK DOOR PLATES“.
WITH BUFFER
for cabinets using
sprung hinges .
O BE EMBEDDED INSIDE THE PANEL
VERSIONS
ADJUSTMENTS
Door plate
Door plate
ROUGH ADAPTER HOUSING
2 min. 1,4 min.
37 long version
20 medium version
14 short version
+6
-0,45
7,5 max.
WITH MAGNET
for cabinets using
unsprung hinges
or negative hinges .
WITH BUFFER
for cabinets using
sprung hinges .
ADJUSTMENTS VERSIONS
the fully renewed and extended program of automatic opening systems
for doors without handles or knobs.
mechanism provides a very silent, yet powerful utilization, granting a long
durability which makes it perfectly suitable for a wide range of doors.
available with bu r, for cabinets using sprung hinges, and with magnet,
unsprung hinges or negative hinges. The aesthetic of bu is now
oved and the range of catch plates for version with magnet is even wider.
esh new and even more captivating design, together with an extended
an innovated range of spring strengths, in order to guarantee the
even with large and heavy doors, and three lengths of the output paths:
Short – 14,5 mm, Medium – 20 mm, Long – 37 mm.
can be installed either concealed or visible, fi xed with adapter housing.
versions’ package is composed of: push-to-open system, adapter plate and
The new adapter housing allows to pre-install K PUSH TECH with the
of the cabinet and leave the ejector pin deactivated during its handling
the small adapter housing for both short and medium size versions
fi ed stock management.
It comes with a wide range of colors: white, grey 19 and black anthracite.
and cabinet is reduced: activation gap is 1,4 mm. Ring thickness is 0,6 mm.
www.italianaferramenta.com
Increased adjustment feature: +6 / -0.45 mm. Beyond this negative adjustment the spring
is deactivated. This feature allows to disable the ejector pin for safety reasons.
Perception of steps indicating the adjustment of the ejector pin: every step-stop position
adjusts the door gap by 0.15 mm. A click-stop indicates the maximum adjustment range.
These features prevent any undesired change of position of the ejector pin during its
utilization.
Reduced depth of drill hole (10 mm less) for the long concealed version.
Full-automatic mounting templates, bringing a signifi cant advantage in productivity.
Possibility of installation in tight drill-holes
- Perfect functioning assured even with hole diameters with small tolerance.
New adapter housing
- The new adapter plates suit with current drilling pattern.
- The fi xing of the adapter plate can be carried out with common self-tapping fl at head
screws and euro screws.
- The adapter plate can be used as template for the spot-drilling.
Highest magnet strength available in the market.
New high performing materials to withstand unusual stresses and to avoid parts’ damages.
The new magnets are installed completely fl ush with the head of the ejector pin, in order to
avoid any scratches on the door plates.
Montera med 2 st
försänkt träskruv
ø 3,5x16 mm.
PUSH CATCHES
AND MAGNETIC
CATCHES
K PUSH TECH
Ø3 x 3
24,5 26,5
32 19
37
8 min.
78,3
14,4
13,2
57010040 EE
57010040 IJ
57010040 AB
EP
= 100 pcs.
= Ø 2,5 mm
1 2 3 4
78,4
16
13,3
57010020 EE
57010020 IJ
57010020 AB
EP
= 100 pcs.
1 2 3 4
ADAPTER HOUSING AND PLATE FOR LONG VERSION
PATENT PENDING
REGISTERED DESIGN
2 min.
+6
-0,45
7,5 max.
efer to
“K PUSH TECH AND
K LOCK DOOR PLATES“.
efer to
“K PUSH TECH AND
K LOCK DOOR PLATES“.
WITH BUFFER
for cabinets using
sprung hinges .
ADJUSTMENTS
Door plate
Door plate
1,4 min.
+6
-0,45
7,5 max.
WITH BUFFER
for cabinets using
sprung hinges .
ADJUSTMENTS
-0.45 mm. Beyond this negative adjustment the spring
e allows to disable the ejector pin for safety reasons.
adjustment of the ejector pin: every step-stop position
click-stop indicates the maximum adjustment range.
ed change of position of the ejector pin during its
Reduced depth of drill hole (10 mm less) for the long concealed version.
Full-automatic mounting templates, bringing a signifi cant advantage in productivity.
Possibility of installation in tight drill-holes
ed even with hole diameters with small tolerance.
- The new adapter plates suit with current drilling pattern.
be carried out with common self-tapping fl at head
- The adapter plate can be used as template for the spot-drilling.
ength available in the market.
withstand unusual stresses and to avoid parts’ damages.
completely fl ush with the head of the ejector pin, in order to
PATENT PENDING, REGISTERED DESIGN
PUSH CATCHES
AND MAGNETIC
CATCHES
K PUSH TECH
klick
K PUSH TECH
PATENT PENDING
REGISTERED DESIGN
2 min.
2 min.
+6
-0,45
7,5 max.
37 long version
20 medium version
14 short version
WITH MAGNET
for cabinets using
unsprung hinges
or negative hinges .
For details refer to
“K PUSH TECH AND
K LOCK DOOR PLATES“.
For details refer to
“K PUSH TECH AND
K LOCK DOOR PLATES“.
WITH BUFFER
for cabinets using
sprung hinges .
TION TO BE EMBEDDED INSIDE THE PANEL
VERSIONS
ADJUSTMENTS
Door plate
Door plate
TION THROUGH ADAPTER HOUSING
2 min. 1,4 min.
37 long version
20 medium version
14 short version
+6
-0,45
7,5 max.
WITH MAGNET
for cabinets using
unsprung hinges
or negative hinges .
WITH BUFFER
for cabinets using
sprung hinges .
ADJUSTMENTS VERSIONS
is the fully renewed and extended program of automatic opening systems
for doors without handles or knobs.
inner mechanism provides a very silent, yet powerful utilization, granting a long
durability which makes it perfectly suitable for a wide range of doors.
is available with bu r, for cabinets using sprung hinges, and with magnet,
using unsprung hinges or negative hinges. The aesthetic of bu is now
oved and the range of catch plates for version with magnet is even wider.
a fresh new and even more captivating design, together with an extended
including an innovated range of spring strengths, in order to guarantee the
functioning even with large and heavy doors, and three lengths of the output paths:
Short – 14,5 mm, Medium – 20 mm, Long – 37 mm.
ence can be installed either concealed or visible, fi xed with adapter housing.
versions’ package is composed of: push-to-open system, adapter plate and
housing. The new adapter housing allows to pre-install K PUSH TECH with the
side of the cabinet and leave the ejector pin deactivated during its handling
and transportation.
of the small adapter housing for both short and medium size versions
guarantees a simplifi ed stock management.
It comes with a wide range of colors: white, grey 19 and black anthracite.
oor and cabinet is reduced: activation gap is 1,4 mm. Ring thickness is 0,6 mm.
www.italianaferramenta.com
Increased adjustment feature: +6 / -0.45 mm. Beyond this negative adjustment the spring
is deactivated. This feature allows to disable the ejector pin for safety reasons.
Perception of steps indicating the adjustment of the ejector pin: every step-stop position
adjusts the door gap by 0.15 mm. A click-stop indicates the maximum adjustment range.
These features prevent any undesired change of position of the ejector pin during its
utilization.
Reduced depth of drill hole (10 mm less) for the long concealed version.
Full-automatic mounting templates, bringing a signifi cant advantage in productivity.
Possibility of installation in tight drill-holes
- Perfect functioning assured even with hole diameters with small tolerance.
New adapter housing
- The new adapter plates suit with current drilling pattern.
- The fi xing of the adapter plate can be carried out with common self-tapping fl at head
screws and euro screws.
- The adapter plate can be used as template for the spot-drilling.
Highest magnet strength available in the market.
New high performing materials to withstand unusual stresses and to avoid parts’ damages.
The new magnets are installed completely fl ush with the head of the ejector pin, in order to
avoid any scratches on the door plates.
PATENT PENDING, REGISTERED DESIGN
Montera med 2 st
försänkt träskruv
ø 3,5x16 mm.
-
(46)*
(35,5)* (33,5)*
Du hittar mer mått, fakta, monteringsanvisningar och skötselråd som PDF på vår hemsida: www.vedum.se
klick
klick
2 min.
37 long version
20 medium version
14 short version
WITH MAGNET
for cabinets using
unsprung hinges
or negative hinges .
INSTALLATION TO BE EMBEDDED INSIDE THE PANEL
VERSIONS
INSTALLATION THROUGH ADAPTER HOUSING
2 min.
37 long version
20 medium version
14 short version
WITH MAGNET
for cabinets using
unsprung hinges
or negative hinges .
VERSIONS
K PUSH TECH is the fully renewed and extended program of automatic opening systems
for doors without handles or knobs.
A special inner mechanism provides a very silent, yet powerful utilization, granting a long
durability which makes it perfectly suitable for a wide range of doors.
K PUSH TECH is available with bu r, for cabinets using sprung hinges, and with magnet,
for cabinets using unsprung hinges or negative hinges. The aesthetic of bu is now
improved and the range of catch plates for version with magnet is even wider.
It comes with a fresh new and even more captivating design, together with an extended
program, including an innovated range of spring strengths, in order to guarantee the
correct functioning even with large and heavy doors, and three lengths of the output paths:
Short – 14,5 mm, Medium – 20 mm, Long – 37 mm.
The same reference can be installed either concealed or visible, fi xed with adapter housing.
The visible versions’ package is composed of: push-to-open system, adapter plate and
adapter housing. The new adapter housing allows to pre-install
K PUSH TECH with the
plate on the side of the cabinet and leave the ejector pin deactivated during its handling
and transportation.
The suitability of the small adapter housing for both short and medium size versions
guarantees a simplifi ed stock management.
It comes with a wide range of colors: white, grey 19 and black anthracite.
Gap between door and cabinet is reduced: activation gap is 1,4 mm. Ring thickness is 0,6 mm.
Increased adjustment
is deactivated. This featu
Perception of
adjusts the door
These features
utilization.
Reduced depth of drill hole (10 mm less) for the long concealed version.
Full-automatic mounting templates, bringing a signi
Possibility of installation in tight drill-holes
- Perfect functioning assu
New adapter housing
- The new adapter plates suit with cur
- The fi xing
screws and eu
- The adapter plate can be used as template for the spot-drilling.
Highest magnet st
New high performing
The new magnets
avoid any scratches on the door plates.
Montera med 2 st
försänkt träskruv
ø 3,5x16 mm.
klick
klick
INSTALLATION TO BE EMBEDDED INSIDE THE PANEL
INSTALLATION THROUGH ADAPTER HOUSING
The suitability of the small adapter housing for both short and medium
guarantees a simplifi ed stock management.
It comes with a wide range of colors: white, grey 19 and black anthracite.
Gap between door and cabinet is reduced: activation gap is 1,4 mm. Ring thickn
Montera med 2 st
försänkt träskruv
ø 3,5x16 mm.
PUSH OPENER RECESSED INTO THE FRAME
Mount as close to the pressure point (where you will press to open) as possible. Can be mounted in the ceiling,
bottom or side.
Before selecting the position, make sure that the door covers the push. We recommend mounting in the side at single doors and in the bottom at
doubble doors. NOTE! is not suitable for installation in bench cabinets with 100 mm or 150 mm side doors and flap-hinged cabinets.
ADJUSTMENT
All dimensions are in mm Adjust to fit
PUSH OPENER WITH ADAPTER
Adjust to fit All dimensions are in mm
ADJUSTMENT
* When mounting together with
the over-folded door, the bracket
is moved in 9 mm, see new
dimensions in brackets.
Mount with 2 pcs
countersunk wood-
screw Ø3,5x16 mm.
Click
Click
Scan the QR code
with your smart-
phone and watch
the instruction film.