Options
PLRF10C/15C-2.0en
49
GARMIN Settings
Setting the PLRF10C/15C
• Store the interface setting "
GArM
"
!
Declination in PLRF10C/15C will be consid-
ered and must be set according the current
location.
Setting the GARMIN
The PLRF is able to transfer data to the following
GARMIN models: GARMIN 60, 76, 72 and 12
series.
System Setup:
• Set the mode to NORMAL.
Navigation Setup:
• Select the position format which is
corresponding to the map being used(UTM /
UPS). Select the map datum which
corresponds to the map being used (WGS84).
• Select the appropriate units (METRIC)
• Select die appropriate heading reference (GRID)
and heading unit (MILS)
Interface Setup:
• Set the data protocol to GRMN / GRMN
(Set the GARMIN GPS as HOST)
!
The proper datum must be selected.
Improper datum selection will result in
poor target position accuracy.
Operation
Perform a complete measurement with data
transfer.
A waypoint "TGT" in the GARMIN will be created,
provided that a valid measurement was taken.
Enter the waypoint menu to get grid
coordinates and height of the measured object.
Depending on the GARMIN model, an new
measurement will overwrite the existing waypoint
"TGT" or create a new waypoint (TGT1,
TGT2,…)
Look up the corresponding GARMIN user manual
for waypoint functionalities.