Options
PLRF10C/15C-2.0en
48
PLGR+96 / PLGR II Settings
Setting the PLRF10C/15C
• Store the Interface setting "PLGr".
!
When used with PLGR declination must be
set at "0" (see pages 30 )
Setting the PLGR+96 / PLGR II
• Set the tracking mode to CONT.
• Select the position format which corresponds to
the map being used.
• Select the appropriate ELEV units.
• Select the appropriate ELEV reference.
• Select the appropriate ANG units.
• Select the ANG reference (Grid).
• Select the datum which corresponds to the map
being employed.
!
The proper datum must be selected.
Improper datum selection will result in
poor target position accuracy.
• Set the AUTOMATIC OFF TIMER to OFF.
• Set the SERIAL mode to standard.
Additional setting for PLGR II
• Configure port C to IP.
• Configure the remaining ports to IP (or
RTCM-NMEA).
• Set the port C baud rate at 9600-9600.
• Change the LRF mode to
TARGETING
.
!
Azimuth in PLRF10C/15C and Azimuth
on PLGR+96 / PLGR II will be different
due to declination angle.
If attempting to use PLGR while "PC" is set, the
warning "PC" flashes in the field of view.