Vectron Touch 15, User Manual

Page: 35 / 83

35
6. S t ar t ing
i
Your Vectron specialist retailer has programmed
the POS Touch 15 for you. If necessary, he will be
glad to support you during initial start-up and will
train you in using your POS system.
6 .1. Setting up the POS Touch 15
6 .1.1. Selecting the setup site for POS Touch 15
• Set up the POS Touch 15 in a well ventilated room with a
temperature of between 0 and 40°C.
• The POS Touch 15 must not be covered during operation.
• Select the set-up site so that the POS Touch 15 is not
exposed to direct sunlight.
• Place the POS Touch 15 on a stable and even surface with
sufficient space.
• Make sure that no liquids can flow over the POS Touch 15 ,
the power supply unit or the mains cable.
• Route the cables so that they are not subject to tensile
loading.
• Route the cables so that no one can trip over them.