Vectron SteelTouch II, User Manual

Page: 23 / 98

23
EN
4 . 3. Use as directed
The SteelTouch II may be used as POS system. The power
supply Vectron PS30 may be used for supplying the Steel-
Touch II with power.
Use the supplied cable with safety plug to connect Steel-
Touch II and power supply Vectron PS30 to a grounded
socket. Using other power supplies and cables is not as di-
rected. The power supply network must be protected with a
residual current device.
SteelTouch II and power supply must not be opened. The
POS system and its accessories must not be modified.
During normal operation of SteelTouch II the port covers
must not be removed from the ports.
The operating company of SteelTouch II is responsible for
storage and backup of data created with the SteelTouch II.
The data is to be processed and stored in such a way that
they comply with eg the demands of fiscal authorities.
Depending on configuration and programming of the
Vectron POS software, operators can modify the stored da-
ta, configuration and programming of the SteelTouch II, for
instance the PLU- or rights table for operators. Furthermo-
re, operators can carry out functions like void if these are
enabled in the rights management of the POS system.