40
Vectrix Electric MAXI-Scooter User’s Guide
TIRES
PROPER PRESSURE FOR YOUR FRONT
AND REAR TIRE
Tire pressure changes with the temperature and
by altitude. You should check the pressure on
your tires often to ensure a safe ride. The front
tire should be at 32 psi (2.2 bar) and the rear
wheel should be 40 psi (2.8 bar).
If you fi nd that the pressure in your tire is always
low and quickly changes from high to low after
being fi lled with air, see your service agent to in-
spect the tire.
REPAIR AND REPLACEMENT OF TIRES
Tires should be checked by a service agent on
a regular basis to ensure that they have enough
tread and are not damaged or punctured in any
way. If you have any questions about your tires
see your service agent for advice and help.
WARNING!
You should replace tires with the standard size
recommended. You should avoid larger tires
than the recommended size. Failure to do this
could result in injury or death.
NOTE!
Always have the tires balanced after
replacing them.
TO REPLACE THE FRONT TIRE....
+
Make sure that the scooter is turned “off”.
+
Raise the scooter up on its center stand on a
fi rm, level surface such that the front tire is off
of the ground.
+
Remove the front brake caliper.
+
Remove the front axle mounting hardware.
+
Move the front axle out of the way and pull the
front wheel from the front fork.
+
Repair/Replace the tire on the front rim and
infl ate to the proper tire pressure.
+
Place the front wheel into position and install
the front axle.
+
Install the front brake caliper.
+
Check that the front wheel is secure and that
the front brake is functioning by exercising the
front brake lever.
+
Retract the center stand to complete
operation.
NOTE!
Low tire pressure can result in decreased range
performance. Always check tire pressure to
keep at optimal performance.
Summary of Contents for MAXI
Page 1: ...User s Guide...