background image

VEC142

OWNER’S MANUAL

& WARRANTY INFORMATION

12 VOLT DC WORKLIGHT 

CORDED • CORDLESS • RECHARGEABLE

THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE
OF THIS PRODUCT. BEFORE USING, READ AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND 
PRODUCT LABELS, PLUS YOUR VEHICLE’S BATTERY MANUFACTURER GUIDELINES. FAILURE TO DO SO COULD RESULT
IN INJURY AND/OR PROPERTY DAMAGE.

4140 SW 28TH WAY, FT. LAUDERDALE, FL 33312

TEL: 954-584-4446 • TOLL-FREE: 866-584-5504 • FAX: 954-584-5556

WWW.VECTORMFG.COM

© 2003 VECTOR MANUFACTURING, LTD.

FT. LAUDERDALE, FL 33312 

MADE IN CHINA

AHB 062303

HIGH INTENSITY

1 YEAR LIMITED WARRANTY PROGRAM

This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities

of Vector Manufacturing, Ltd., regarding this product. There is no other warranty, other than described herein.
This Vector Manufacturing, Ltd. product is warranted, to the original purchaser only, to be free of defects

in materials and workmanship for one year from the date of purchase without additional charge. The

warranty does not extend to subsequent purchasers or users. Vector Manufacturing, Ltd. will not be responsible

for any amount of damage in excess of the retail purchase price of the product under any circumstances.

Incidental and consequential damages are specifically excluded from coverage under this warranty.
This product is not intended for commercial use. This warranty does not apply to accessories or damage to units

from misuse or incorrect installation. Misuse includes wiring or connecting to improper polarity power sources.

RETURN/REPAIR POLICY:

Defective products, other than accessories, may be returned postage prepaid to Vector

Manufacturing. Any defective product, other than accessories, that is returned to Vector Manufacturing within

30 days of the date of purchase will be replaced free of charge. If such a product is returned more than 30 days

but less than one year from the purchase date, Vector Manufacturing will repair the unit or, at its option, replace

it free of charge.
If the unit is repaired, new or reconditioned replacement parts may be used, at Vector Manufacturing’s option.

A unit may be replaced with a new or reconditioned unit of the same or comparable design. The repaired or

replaced unit will then be warranted under the terms of the remainder of the warranty period. The customer is

responsible for the shipping charges on all returned items after 30 days. During the warranty period, Vector

Manufacturing, Ltd. will be responsible for the return shipping charges.

LIMITATIONS:

This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from normal

wear and tear (including chips, scratches, abrasions, discoloration or fading due to usage or exposure to

sunlight), accidents, damage during shipping to our service facility, alterations, unauthorized use or repair,

neglect, misuse, abuse, failure to follow instructions for care and maintenance, fire, flood and Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department (954) 584-4446 or

toll- free (866) 584-5504 for general repair information and charges if applicable. You may also contact us

through our website www.vectormfg.com.

STATE LAW RIGHTS:

This warranty gives you specific legal rights. Some states do not allow limitations on how

long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the

exclusions or limitations stated herein may not apply. This warranty gives the purchaser specific legal rights; other

rights, which vary from state to state, may apply.

TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT:

Contact Vector Manufacturing Technical Support by telephone,

fax or mail. We suggest that you keep the original packaging in case you need to ship the unit. When returning

a product, include your name, address, phone number, dated sales receipt (or copy) and a description of the

reason for return and product serial number. After repairing or replacing the unit, we will make every effort to

return it to you within four weeks.

WARRANTY ACTIVATION:

Please complete Warranty Activation Card and mail to Vector Manufacturing. Enter

“VEC138BY” as Model and “Xtrme Sport Spot 2,000,000 Candle Power” as Product Type. All Vector

Manufacturing, Ltd. products must be registered within 10 days of purchase to activate this warranty. Mail the

completed registration card, along with a copy of the original sales receipt to:

ATTN.: CUSTOMER SERVICE / VECTOR MANUFACTURING, Ltd.

4140 SW 28th Way, Ft. Lauderdale, FL 33312 

PH: 954-584-4446 • TOLL FREE: 866-584-5504 • Fax: 954-584-5556. 

You may also contact us at our web site www.vectormfg.com.

WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.

Summary of Contents for VEC142

Page 1: ...ble design The repaired or replaced unit will then be warranted under the terms of the remainder of the warranty period The customer is responsible for the shipping charges on all returned items after 30 days During the warranty period Vector Manufacturing Ltd will be responsible for the return shipping charges LIMITATIONS This warranty does not cover accessories bulbs fuses and batteries defects ...

Page 2: ... locked position simply rotate the thumbscrew counter clockwise to loosen Then position the swivel head in the desired position and tighten the thumbscrew to hold in place An additional benefit of the WorkLight is the utility value of the clamp and hook accessory Utilizing this accessory provides many mounting positioning options that can allow for hands free operation 2 1 IMPORTANT SAFETY INFORMA...

Page 3: ...er switch 1 The trigger switch is located on the front of the pistol grip handle of the spotlight see Figure 1 2 To turn the Xtreme Sport Spot 2 000 000 On squeeze the trigger switch 3 To turn the Xtreme Sport Spot 2 000 000 Off release the trigger switch 4 To lock the trigger switch into the on position for continuous operation squeeze the trigger switch and firmly press the trigger locking butto...

Page 4: ...ger switch is turned Off 3 Lift the battery pack cover and remove it 4 Carefully disconnect the positive and negative wires from the battery clips noting the position of the wires 5 Follow the directions to replace the quartz halogen bulb in the spotlight to gain access to the battery from the inside of the spotlight body 6 Push on the battery from the inside of the body to remove the battery 7 Se...

Reviews: