background image

VEC1086 A

REV101103

10

VECTOR 5 YEAR LIMITED WARRANTY PROGRAM

This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of Vector
Manufacturing, Ltd., regarding this product. There is no other warranty, other than those described herein. 

This Vector Manufacturing, Ltd. product is warranted, to the original purchaser only, to be free of defects in materials and
workmanship for five years from the date of purchase without additional charge. This warranty does not extend to
subsequent purchasers or users. Vector Manufacturing, Ltd. will not be responsible for any amount of damage in excess
of the retail purchase price of the product under any circumstances. Incidental and consequential damages are
specifically excluded from coverage under this warranty.

This product is not intended for commercial use. This warranty does not apply to accessories or damage to units from
misuse or incorrect installation. Misuse includes wiring or connecting to improper polarity power sources.

RETURN / REPAIR POLICY: 

Defective products, other than accessories, may be returned postage prepaid to Vector

Manufacturing. Any defective product, other than accessories, that is returned to Vector Manufacturing within 30 days of
the date of purchase will be replaced free of charge. If such a product is returned more than 30 days but less than five
years from the purchase date, Vector Manufacturing will repair the unit or, at its option, replace it free of charge.

If the unit is repaired, new or reconditioned replacement parts may be used, at Vector Manufacturing’s option. A unit may
be replaced with a new or reconditioned unit of the same or comparable design. The repaired or replaced unit will then
be warranted under the terms of the remainder of the warranty period. The customer is responsible for the shipping
charges on all returned items after 30 days. During the warranty period, Vector Manufacturing, Ltd. will be responsible
for the return shipping charges.

LIMITATIONS:  

This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from normal wear

and tear (including chips, scratches, abrasions, discoloration or fading due to usage or exposure to sunlight), accidents,
damage during shipping to our service facility, alterations, unauthorized use or repair, neglect, misuse, abuse, failure to
follow instructions for care and maintenance, fire, flood and Acts of God. If your problem is not covered by this warranty,
call our Technical Support Department at (954) 584-4446 or toll free: (866) 584-5504 for general repair information
and charges if applicable. You may also contact us through our website at www.vectormfg.com.

STATE LAW RIGHTS:  

This warranty gives you specific legal rights. Some states do not allow limitations on how long an

implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the exclusions or
limitations stated hereinmay not apply. This warranty gives the purchaser specific legal rights; other rights, which vary
from state to state, may apply.

TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT:

Contact Vector Manufacturing Technical Support by telephone, fax

or mail. We suggest that you keep the original packaging in case you need to ship the unit. When returning a product,
include your name, address, phone number, dated sales receipt (or copy) and a description of the reason for return and
product serial number. After repairing or replacing the unit, we will make every effort to return it to you within four weeks.

WARRANTY ACTIVATION:  

Please complete Warranty Activation Card and mail to Vector Manufacturing. Enter “VEC1086

A” as Model and “12V Automatic Battery Charger 2/4/6 Amp” as  Product Type. All Vector Manufacturing, Ltd. products
must be registered within 10 days of purchase to activate this warranty. Mail the completed registration form, along with
a copy of the original sales receipt to:

ATTN.: CUSTOMER SERVICE / VECTOR MANUFACTURING, LTD.

4140 SW 28TH WAY, FT. LAUDERDALE, FL 33312

PH: 954-584-4446 • TOLL FREE: 866-584-5504 • FAX: 954-584-5556.

YOU MAY ALSO CONTACT US AT OUR WEB SITE WWW.VECTORMFG.COM.

WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.

Summary of Contents for VEC1086 A











Reviews: