background image

4

INTRODUCTION

Congratulations on selecting the VECTOR® JUMP-STARTER, AIR COMPRESSOR
and 12 VOLT DC POWER SUPPLY. This compact jump-starter is unique in the
amount of energy it can supply for its size. The internal battery is a high densi-
ty sealed, lead-acid battery that stores and delivers energy comparable to full
sized ordinary jump-starters. Please read this guide carefully before use to
ensure optimum performance and avoid damage to the unit or items that you
are using it with. 
A standard feature of this model is a high pressure, self-contained tire compres-
sor with lighted gauge. This compressor allows quick inflation of vehicle tires to
260 PSI and with supplied adapter nozzles, inflates beach balls, rafts and virtu-
ally any low-pressure inflatables. Three different sized nozzles allow for easy
connection to all popular inflatables. 
The VECTOR® JUMP-STARTER & 12 VOLT DC POWER SUPPLY is a compact,
durable and portable jump-start system for vehicles and boats that have a stan-
dard 12 Volt battery system. This self-contained, rechargeable system will start
most vehicles and boats without the need for a host vehicle or 120 Volt AC
power supply. It can also be used as a safe, portable source of 12 Volt DC
electric power in remote locations and/or emergency situations. It is ideal for
use with Vector 12 Volt DC cordless, portable, rechargeable products and
MAXXSST DC/AC Power Inverters.

Use the VECTOR JUMP-START SYSTEM to:

Jump-start any engine system with a standard 12 Volt DC battery:

boat; truck; car; air-

plane; RV; personal watercraft; snowmobile; garden tractor; gasoline engine
generator, etc.

Operate:

12 Volt DC fans, inflators, fluorescent worklights, cellular phones (can

quick-charge a cellular phone by using the phone’s 12 Volt DC adapter cord),
spotlights, TVs, portable radios, cassette or CD players, and more.   

Operate:

Certain 120 Volt AC Accessories (requires a Vector 12 volt power

inverter, sold separately).

Inflate:

Truck and auto tires, sports equipment, beach inflatables. Three different

adapter nozzles allows for inflation of items without a standard tire valve stem.
The easy-to-read lighted pressure gauge assures accurate inflation pressures day
or night.

The JUMP-START SYSTEM has an easy-to-read series of LED (Light Emitting Diode)
charge indicators that show when the unit is fully charged, or the level of charge
in the battery. Charge level can be viewed when the Charge Status pushbutton
is pressed. A 12 Volt DC accessory socket is provided for use with appliances
that can operate from a vehicle 12VDC accessory outlet. This allows maximum
portability and utility when the Jump-Start System is used in remote locations.
The Jump-Start System can be recharged from any standard 120 Volt AC power
source using the supplied AC Recharge Adapter. The adapter barrel connector
attaches to the Recharge Port on the top panel of the jump-starter. A built-in 12
Volt appliance socket and the appropriate DC/DC charging/adapter cord is
used to recharge the battery from another 12 volt DC source. When pressed, the
CHARGE STATUS pushbutton will show the battery power level status on the
Battery Status display (from Low to Full). The green LED full indicator illuminates
when the unit is fully recharged and charging can be discontinued. An ON/OFF
switch operates the built-in work/emergency light.

3

CAUTION: 

Caution statements advise against certain conditions and practices that may
result in damage to vehicles, appliances and/or the jump-starter.

IMPORTANT:

Although this unit is delivered in a partially charged state, you must fully charge it
with the supplied 120 Volt AC charger for a full 24 hours before using it for the first
time. You cannot overcharge the unit using the AC charger method.

1) Use only the supplied cords/adapters for recharging this unit. Do not

recharge for more than 3-4 hours maximum using 12 Volt DC method.
Recharge unit after each use.

2) All On/Off switches should be in the OFF position when the unit is charging

or not in use. Make sure all switches are in the OFF position before connec-
tion to a power source or load.

3) Never insert anything other than the supplied power/recharging cords or 

recommended appliance power/recharging cords into the 12 Volt DC 
charging/power socket on this unit. Do not use any accessory that is not 
recommended or provided by the manufacturer.

4) Do not use this unit to operate appliances that draw more than 20 amps. 
5) This system is designed to be used only on vehicles with 12 Volt DC battery 

systems. Do not connect to a 6 Volt or 24 Volt battery system.

6) This system is not designed to be used as a replacement for a vehicular bat-

tery. 

7) This system has an automatic switch that only powers the jumper cables

when the proper polarity and voltage are sensed. The vehicle battery must
have at least two volts for this feature to operate.

8) Do not attempt to operate a vehicle that does not have a battery installed.
9) Vehicles that have on-board computerized systems may be damaged if vehi-

cle battery is jump-started.  Before jump-starting, read the vehicle owner’s
manual 
to confirm that external-starting assistance is advised. 

10) Excessive engine cranking can damage a vehicle’s starter motor. If the

engine fails to start after the recommended number of attempts, discontinue
jump-start procedures and look for other problems that may need to be cor-
rected.

11) Although this unit contains a non-spillable battery, it is recommended that

unit be kept upright during storage, use and recharging. To avoid possible
damage that may shorten the unit’s working life, protect it from direct sun-
light, direct heat and/or moisture.

12) Check unit periodically for wear and tear. Replace worn or defective parts

immediately. Contact Vector Customer Service department toll-free 866-
584-5504.

13) Do not attempt to jump-start a frozen battery.
14) Never submerge this unit in water.
15) DO NOT over-inflate tires or other inflatables.

Summary of Contents for Start-IT VEC012APC








Reviews: