background image

                                                                                                                  S-19-01-1214-UV101 V1.3 

14 

Section 15: Warranty 

 
15.1 Malfunction 
Vector R & D Inc. hereby warrants that for a period of one year from the delivery date, this device shall be 
free from defects in material and workmanship. In case the machine is found malfunctioned under normal 
use, Vector R & D Inc. will offer service of free maintenance and parts for replacement. 
 
15.2 Repair 
Repairs  must  be  only  carried  out  by  an  authorized  Vector  R  &  D  Inc.  engineer/dealer.  If  repairs  during 
warranty period are not carried out by an authorized engineer/dealer, warranty will expire immediately. 
 
15.3 Warranty Exception 
The warranty stated herein is the sole warranty applicable to Vector R & D Inc. products. Vector R & D Inc. 
expressly disclaims the liability for warranty even within warranty period, if 
 
(1) Damages caused by natural disaster. 
(2) Operator's fault or wrong operation. 
(3) Application use other than curing light-cured material purpose. 
(4) A malfunction or damage caused by repair, adjustment, modification which is not carried out by Vector R 
& D Inc. authorized technicians/dealers. 
(5) A malfunction caused by abnormal power source or voltage. 
(6) It is a consumption part.           
 
 

Summary of Contents for Lil' Beaver 2.0

















Reviews: