PLEASE READ BEFORE BEGINNING INSTALLATION
Prior to starting the installation of this product, we suggest reading the entire instruction manual.
Several of the steps involved in installation of this product are fairly complex, and reading through
ahead of time will help you with a pain free installation. An extra minute or two spent now will save a
lot of headache down the road.
This product must be installed by someone with a certain amount of mechanical aptitude. Vector
OffRoad can not be held liable for damage caused to your vehicle due to poor or incomplete installa-
tion of this product. If you have any questions, are missing parts, or need help locating a skilled instal-
lation shop in your area, please contact us.
As with all of our products the JL E-Dock is designed for off-road use only, compatibility with OEM
systems has not been formally tested.
OFFROAD.COM
JL E-DOCK 2018+ MID WIDTH INSTALLATION INSTRUCTIONS
Page 1 of 3
REV 091018
PARTS LIST
QTY
Corner connectors
2
Stainless Steel End Caps (Installed)
2
Aluminum Track Pieces
3
Left and Right Brackets
2
1/4“ Set Screws
4
1/4” Button Head Screws
2
REQUIRED TOOLS
Phillips Screw Driver
1/8” and 5/32” Hex L-Key (allen key)
