1.
Carburettor
2.
Fuel Injector
3.
Air Injector Tube
4.
Main Air Compressor Tube
5.
Compressor
6.
Safety Mesh
7.
Resonator
8.
Chemical Inlet
9.
Close valve/Directional valve (SF model)
10.
Chemical Supply valve
11.
Security Cover
12.
Handle/Manual Start Pump (optional)
13.
Off Button (choke)
14.
Control Remoto
15.
Cable
16.
Cable de Corriente con Pinzas de Cocodrilo
17.
Grapa
18.
Conector (izquierda)
19.
Conector (derecha)
20.
Bujía
21.
Filtro inyector de gasolina
22.
Intercambio de Aire
23.
Tubo a Presión
24.
Repetidor
25.
5
CHECKLIST BEFORE STARTING THE UNIT
Fill the fuel tank
Fill the tank with undiluted petrol using a funnel. Fill the tank to a third of its capacity. When you
fi
nish
fil
ling the
tank, close the tank cap
�
ghtly.
Note: Please make sure you only add the prescribed amount of fuel.
Fill the chemical tank and connect to the thermal fogger
Pour the special fogging chemical mixture into the chemical tank. It is important not to add more chemical mixture
than it’s needed. Leaving remaining chemical in the tank
a�e
r use, could a
ff
ect the performance of the machine next
�
me you use it, as deposits may solidify in the system. When you
fi
nish
fil
ling the tank, close the tank cap
�
ghtly.
Connect the power and remote control
Connect the 12V power lead (right) and remote control cable (le
�
) as indicated in the picture below. Once plugged
in, connect the power lead directly to the
ba�
ery using the cigare
�
e lighter plug. Red (Posi
�
ve), Black (Neg
a�
ve).
Once connected, check that the green power light on the control remote is on.
Note: Please make sure solution tank
switch on the remote control is turned to the “OFF” position before connecting the power
Fuel Intake (right resonator)
Fuel Intake (le
�
resonator)
