11
©Vecow GPC-1000 User Manual
GETTING TO KNOW YOUR GPC-1000
2.2.6 USB 3.1
There are 4 USB 3.1 connections available supporting up to 5GB per second data
rate in the front side of GPC-1000. It is also compliant with the requirements of
Super Speed (SS), High Speed (HS), Full Speed (FS) and Low Speed (LS).
DVI-D
DP
DP
Switch
O
n |
Off
LAN 3
LAN 4
LAN 1
LAN 2
COM
RS-232/422/485
V+
V+
V
DC-IN
V
Isolated
DIO
D I
PIN 1 ~ 8
DO
PIN 11 ~ 18
1
10
11
20
9-55V 1500W
2.2.7 Ethernet Port
There are dual 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side. LAN 1 is powered by Intel
®
i219 Ethernet Phy and
LAN 2 is powered by Intel
®
I210 Ethernet engine. When both LAN 1 and LAN 2
work at normal status, iAMT 11.0 function is enabled.
Using suitable RJ-45 cable, you can connect the system to a computer or to
any other devices with Ethernet connection; for example, a hub or a switch.
Moreover, both LAN 1 and LAN 2 support Wake on LAN and Pre-boot functions.
The pin-outs of LAN 1 and LAN 2 are listed as follows :
Pin No.
10/100 Mbps
1000Mbps
1
E_TX+
MDI0_P
2
E_TX-
MDI0_N
3
E_RX+
MDI1_P
4
-----
MDI2_P
5
-----
MDI2_N
6
E_RX-
MDI1_N
7
-----
MDI3_P
8
-----
MDI3_N
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network; The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
