103
Appendix B
BOOL SetPOE(BYTE POE);
Set POE on/off setup
POE: POE switch (POE[7:0])
Return:
TRUE (1): Success; FALSE (0): Fail (driver not work, or hardware problem)
BOOL GetDIO1Config(BYTE *Isolate_Type, BYTE *DI_NPN, BYTE *DO_NPN);
Get DIO1 configuration
Isolate_Type: DIO1 Isolate Type
1: Isolated DIO; 0: Non-Isolated DIO
DI_NPN: DIO1 input NPN mode (DI_NPN[7:0])
1: PNP (Source) mode for European rule; 0: NPN (Sink) mode for Japanese rule
DO_NPN: DIO1 output NPN mode
1: PNP (Source) mode for European rule; 0: NPN (Sink) mode for Japanese rule
Return:
TRUE (1): Success; FALSE (0): Fail (driver not work, or hardware problem)
BOOL Set DIO1Config(BYTE Isolate_Type, BYTE DI_NPN, BYTE DO_NPN);
Set DIO1 configuration
Isolate_Type: DIO1 Isolate Type
1: Isolated DIO; 0: Non-Isolated DIO
DI_NPN: DIO1 input NPN mode (DI_NPN[7:0])
1: PNP (Source) mode for European rule; 0: NPN (Sink) mode for Japanese rule
DO_NPN: DIO1 output NPN mode
1: PNP (Source) mode for European rule; 0: NPN (Sink) mode for Japanese rule
Return:
TRUE (1): Success; FALSE (0): Fail (driver not work, or hardware problem)
BOOL GetDIO2Config(BYTE *Isolate_Type, BYTE *DI_NPN, BYTE *DO_NPN);
Get DIO2 configuration
Isolate_Type: DIO2 Isolate Type
1: Isolated DIO; 0: Non-Isolated DIO
DI_NPN: DIO2 input NPN mode (DI_NPN[7:0])
1: PNP (Source) mode for European rule; 0: NPN (Sink) mode for Japanese rule
DO_NPN: DIO2 output NPN mode
1: PNP (Source) mode for European rule; 0: NPN (Sink) mode for Japanese rule
Return:
TRUE (1): Success; FALSE (0): Fail (driver not work, or hardware problem)
BOOL Set DIO2Config(BYTE Isolate_Type, BYTE DI_NPN, BYTE DO_NPN);
Set DIO2 configuration
Isolate_Type: DIO2 Isolate Type
1: Isolated DIO; 0: Non-Isolated DIO
DI_NPN: DIO2 input NPN mode (DI_NPN[7:0])
1: PNP (Source) mode for European rule; 0: NPN (Sink) mode for Japanese rule
DO_NPN: DIO2 output NPN mode
1: PNP (Source) mode for European rule; 0: NPN (Sink) mode for Japanese rule
Return:
TRUE (1): Success; FALSE (0): Fail (driver not work, or hardware problem)
Summary of Contents for ECS-9210
Page 68: ...61 HARDWARE INSTALLATION Step 4 Open CPU slot Be careful CPU pins Step 3 CPU slot...
Page 77: ...70 HARDWARE INSTALLATION Vecow ECS 9200 9100 User Manual Step 3 Finish Step 4 Install SSD HDD...
Page 78: ...71 HARDWARE INSTALLATION 3 9 Installing M 2 Step 2 Fasten one M3 screws Step 1 M 2 slot...
Page 82: ...75 HARDWARE INSTALLATION Step 2 Fasten 4pcs KHS 6 32 screws then finish...