
25
©Vecow EAC-6000 User Manual
GETTING TO KNOW YOUR EAC-6000/EAC-6100/EAC-6200
2.3.1.8 CN10 : UART / CAN BUS
CN10
The Connector is suitable for combo applications that use. Host I/Fs supported
CAN BUS and UART (COM2). It must be switched by DIP SIWTCH SW8 (2.4.1.7)
if the UART signal is enabled.
Pin No.
Definition
1
PWR 5V
2
UART_TXD
3
UART_RXD
4
UART_RTS
5
UART_CTS
6
GND
7
GND
8
CAN_H
9
CAN_L
10
GND
1
10
2.3.1.9 M2M_CN1 : M.2 Key M Slot
M2B_CN1
The M.2 key M connector is suitable for applications that use Host I/Fs supported
PCIe Gen 4 x4, it can be plugged NvME Module card 2280 type.