Vecow EAC-6000, User Manual, Page: 21 / 59

14 ©Vecow EAC-6000 User Manual GETTING TO KNOW YOUR EAC-6000/EAC-6100/EAC-6200
2.2.1.5 USB 3.2 Gen2
Using suitable RJ-45 cable, you can connect the system to a computer, or to
any other devices with Ethernet connection, for example, a hub or a switch. The
pin-outs of LAN1 and LAN2 are listed as follows:
Pin No. 10/100Mbps 1000Mbps
1 E_TX+ MDI0_P
2 E_TX- MDI0_N
3 E_RX+ MDI1_P
4 ------ MDI2_P
5 ------ MDI2_N
6 E_RX- MDI1_N
7 ------ MDI3_P
8 ------ MDI3_N
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/ Link/ Speed status of the connection .
LED Location LED Color 10Mbps 100Mbps 1000Mbps
Right Green Off
Solid
Green
Solid
Orange
Left Yellow
Twinkling
Yellow
Twinkling
Yellow
Twinkling
Yellow
8 1
There is a USB 3.2 Connector connections available supporting up to 10Gb per second
data rate in the front side of EAC-6000 series. It also compliant with the requirements of
Super Speed (SS), high speed (HS), full speed (FS) and low speed (LS).