![background image](http://html1.mh-extra.com/html/vecow/dvc-1000/dvc-1000_user-manual_3727148035.webp)
30
©Vecow DVC-1000 User Manual
Appendix A
A
APPENDIX A : Reset Camera
A.1 Function Description
If for any reason the camera failed to work as intended, you can restore the camera
to its factory default setting by shorting the Pin 3 (GND) and Pin 4 (HW Reset)
simultaneously in the M12 interface of the camera.
M12 8-pin male connector cable Pinout
Pin No.
Definition
Pin No.
Definition
1
12V-in
2
GPIO_A0
3
GND
4
HW Reset
5
SYNC
6
GND
7
12V
8
GPIO_A7
1
7
6
2
3
4
8
5
Step 1
Insert a pin into the Pin 3 (GND) and Pin 4 (HW Reset)
of the camera and hold 30 seconds.
Step 2
Re-plug the camera. The camera is restored to its default settings.
1
7
6
2
3
4
8
5
A.2 Frequently Question Answer
Question :
Sometimes it show "Error : Connection to servers failed" when opened "Intel
Realsense Viewer".
Answer :
When searching device, the device is about to reboot, When open the " Intel
Realsense viewer 2.37.0" , the device has rebooted. We recommend waiting for 1
minute after the device restarts before searching for the device.